20 Most Recent 2006 Chrysler Town & Country Questions & Answers

catalytic converter, PLUGGING UP

2006 Chrysler... | Answered on Oct 13, 2017

you could try tapping on the gas tank with a rubber mallet I have found sometimes this knocks a stuck sending unit back working again (rubber) mallet ! this is not fun to change, but is fairly inexpensive and a battery reboot might be in order as sometimes it can be the BCM making a fuss
2006 Chrysler Town Country Fuel Tank Sending Unit

2006 Chrysler... | Answered on Jul 19, 2017

your clue that it is ridiculously hot indicates that the problem is in the climate control module
it indicates that it is cycling the thermostat or you have a faulty thermostat that is cycling the climate control module
take it to an accredited ac specialist shop for a proper diagnosis

2006 Chrysler... | Answered on Jun 08, 2017

IPC - instrument cluster - BCM - body control module (computer )

U0101 - your vehicle has a serial data communication network that all the modules communicate on , this U0101 means one isn't talking . You best bet take to a qualified repair shop .

2006 Chrysler... | Answered on Apr 30, 2017

Possibly a vacuum leak, double ck the spark plugs installed for the proper plugs. Were they gapped correctly?

2006 Chrysler... | Answered on Apr 21, 2017

I am continuously amazed at how many people ask for help, but do not specify the year, make, model, and trim on cars! Do you all think those offering help are mind readers?

2006 Chrysler... | Answered on Apr 20, 2017

The 20A fuse is the fuse for the solenoid, not the starter motor as that draws upwards of 150Amps.Probably faulty wire or solenoid.

2006 Chrysler... | Answered on Mar 24, 2017

You could give it a shot but no guarantees on that one. Good luck

2006 Chrysler... | Answered on Mar 23, 2017

Have you checked the pin switchs at the doors ? This function does run thru the BCM but is not a common failure so I cannot rule out a defective in the BCM

2006 Chrysler... | Answered on Mar 22, 2017

Freeze plugs are easy to install if you have room to work. Use a punch or screwdriver to knock in one side of the plug, then grab it with pliers and pull it out. clean the recess thoroughly where the plug sits. You can buy an expanding type plug with a rubber insert. Just set it in place and use a small wrench to tighten the plug. As screw is tightened, the rubber expands and seals the hole. Just ask at parts store for the freeze plug with rubber expander. Different sized freeze plugs, so make sure you get the right fit. Maybe take old one with you, but counter man may be able to look up the correct size by car and engine info.

2006 Chrysler... | Answered on Jan 20, 2017

Not finding what you are looking for?
2006 Chrysler Town & Country Logo

1,137 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Town & Country Chrysler

  • Town & Country Chrysler

Most Popular Question

2006 town country need remove whole

  • Cars & Trucks