Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 19, 2015

Where is the central junction box on a 2003 FORD ESCAPE ?

5 Related Answers

Anonymous

  • 710 Answers
  • Posted on Apr 25, 2009

SOURCE: can't find central junction box

Under the steering wheel are two plastic screws. Turn them one quarter turn counter-clockwise. Pul the panel away from the dashboard. And your there.

Ad

Anonymous

  • 312 Answers
  • Posted on Jun 10, 2010

SOURCE: Ford Escape 2003. Engine suddenly overheat.

Engine over heating can be caused by a number of things. When you say the water pump and radiator appear to be ok I am also guessing that you checked the coolant level to make sure it is normal.

If the level is low then you obviously have a leak. Insufficient coolant circulating will not cool the motor properly because it won't be able to draw enough heat out. If the level is normal then you need to check the thermostat to make sure it is opening properly. To do this, run the motor to temperature and check the top and bottom hoses. They should both be hot and firrm once the thermostat opens meaning the circulation loop is operating properly. If the top is hot and firm and the bottom is cold/soft or collapsed then the thermostat isn't opening.

If the thermostat is operating properly then you ned to look for some other obstruction or cause for coolant loss. Check the head/intake gaskets, hose connections, hoses, over flow tank, radiator fins, radiator side tanks etc..

Good luck.

Testimonial: "Thank you for your quick response. I will get the head/intake gasket checked."

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Dec 10, 2010

SOURCE: I have a 2006 Ford Escape 2.3L Manual Transmission

no i think your problem is the reverse light switch in the gearbox or the bulbs but your dealer is trying to give some fairy story to turn a simple job into a major rewire or something ,either that or they employ monkeys because they only pay peanuts .ask a local mecahnic to check it out for you ,look for a feed to the reverse light switch on the gearbox first ,then if a feed put a paper clip across the two wires and see if the lights come on ,if they do then just renew the switch ,if no Supply then make one ,find fused ignition on supply in the power distribution box under the bonnet and run this to the switch and away you go --- simple .Problem with dealers is someone has to pay the gelled up nancy boys in suits who are so called salesman ,and not forgetting the barbie doll secretaries and the managers free company car .whos paying for all this??

clifford224

Clifford Beard

  • 1975 Answers
  • Posted on May 07, 2011

SOURCE: I need a 2002 ford windstar central junction box

I;m guessing when you say juntion box you are talking about the power distribution box/fuse box located in the engine compartment. These are the diagrams that I have given you below. this should be in your owners manual if you have one. If you don't and would like a copy, you can email me at [email protected] with your make, model and year and I will be happy to email you a copy. I hope this helps and good luck.


clifford224_397.gifclifford224_398.gifclifford224_399.gifclifford224_400.gifclifford224_401.gif

dustydis

vegas devildog

  • 373 Answers
  • Posted on Sep 25, 2012

SOURCE: THE MECHANIC SAID I NEED A CENTRAL JUNCTION BOX TO REPLACE MY FUEL PUMP RELAY,I'M GETTING POWER, BUT MY NAVIGATOR JUST WON'T START. DO I HAVE TO REPLACE THE WHOLE FUSE BOX?

that's a first for me get a second opinion is this guy a dealer he sound like a crook

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Ford Rocam Bantam burn fuse.

Question edited for clarity, correct model name rockem > Rocam

You need to identify the fuse and what is on that circuit and look for what is shorting it out. It is normally abraded insulation that is grounding back to the battery, or what is on the end of it has failed.

Ford Bantam (2002 -2011) - fuse box diagram

Auto Genius https://www.autogenius.info > ford-bantam-2002-201...

Dec 27, 2015 - Ford Bantam (2002 - 2011) - fuse box diagram. Year of production: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011. Central junction ...

Central Junction Box (Cjb)- Front View, Fuses - Ford 2002 ...

ManualsLib https://www.manualslib.com > ... > Workshop manual
Ford 2002 Bantam Manual Online: Central Junction Box (Cjb)- Front View, Fuses. Item Description 1 Fuse F12 - multifunction switch, wind- shield wiper motor, ...

..

0helpful
1answer

#19 fuse on a 2003 windstar,what dose it run

Which fuse box ? under the hood in engine compartment or inside the passenger compartment ? The front electronic control module controls the power lock's . Fuse # F2.14 -10 amp located in the central junction box powers the FEM . Fuse # F2.6 - 15 amp located in the central junction box powers the keyless entry module. Did you try battery in the key fob (remote ) ? Take it to a qualified repair shop an have code's checked .
0helpful
1answer

Where is the fuel pump fuse on 2003 4.6 ford expedition

What's up ! your fuel pump fuse is in the central junction box , but you also have a fuel pump relay , a Inertia fuel cut out switch .The central junction box is located -

under dash panel, RH side fuse F1.34 20amp fuel pump

0helpful
1answer

On 2003 Ford F350 6.0 diesel where is the fuel pump relay?

Hello freefallcrus
The fuel pump relay for the 2003 f350, is an integral part of the central junction block(fuse box) located under the left side of the dash. So in order to replace the relay, you would have to replace the junction block. Hope this is helpful.
1helpful
1answer

What is the fuse location for the power windows and for the rocker switches for the 2002 Ford Explorer? Thanks

for early production models
bjb (battery junction box) fuse #6
cjb (central junction box) fuse #17

for late production models
bjb (battery junction box) fuse #6
bjb (battery junction box) fuse #47
bjb (battery junction box) fuse #2
cjb (central junction box) fuse #17



3helpful
2answers

Where is the horn relay?

The dealer can hook up his diagnostic tool and retrieve the fault code. -------------- SECTION 413-06: Horn 2003 Expedition/Navigator Workshop Manual DESCRIPTION AND OPERATION Horn Horn components include the following items:
  • clockspring
  • horn relay
  • horns
  • steering wheel pad horn switch
Horn switches The horn switch is incorporated into the driver side air bag module in the steering wheel. The switch is powered through the clockspring and grounded through the steering column. For removal and installation of the horn switch, refer to Section 501-20B .
Horn relay The horn relay is incorperated into the central junction box (CJB). The central junction box is located behind the passenger lower kick panel.
------------------------------------------------------------
Symptom Chart
Symptom Chart Condition Possible Sources Action
  • The horn does not sound
  • Central junction box (CJB).
  • CJB fuse 26 (20A).
  • Circuitry.
  • Horn switch.
  • Horn.
  • Clockspring.
  • Powertrain control module (PCM).
  • Go To Pinpoint Test A .
  • The horn sounds continuously
  • Central junction box (CJB).
  • Circuitry.
  • Horn switch.
  • Horn.
  • Vehicle security module.
  • Tire pressure monitor (TPM) module.
  • Clockspring
  • Go To Pinpoint Test B .
4helpful
3answers

2003 ford escape. radio and sideview mirrors don't work, but clock in radio does. I checked both panel of fuses.

for radio

Visual Inspection Chart Mechanical Electrical
  • Audio unit
  • Antenna or antenna cable
  • audio speakers mounting/speaker cones
  • Radio ignition interference capacitor, radio frequency interference suppression bond
  • Central junction box (CJB) fuses:
    • 19 (10A)
    • 12 (5A)
  • Battery junction box (BJB) fuses:
    • 19 (40A)
    • 20 (40A)
    • 27 (10A)
  • Connectors
  • Ignition switch
  • Circuitry
  • Audio unit


for mirrors

Visual Inspection Chart Mechanical Electrical
  • Exterior rear view mirror(s)
  • Interior rear view mirror
  • Central junction box (CJB) Fuse(s):
    • 8 (10A)
    • 16 (10A)
  • Circuitry
  • Exterior rear view mirror motor(s)
  • Exterior mirror control switch
  • Heated rear window switch
1helpful
1answer

2001 ford escape..with truck running ,radio stops working when put in gear but works ok in neutral and park.it works ok in all gears when key is on but truck not running..

There are a couple of known things to check.
Check connector C134 it is under the hood right below the driver's side headlamp.It is a 42 pin connector with either an 8mm or 10mm bolt in center of it.Take it apart and inspect it for moisture and corrosion.Clean it and add some dielectric grease to the terminals then reconnect it.
Also open drivers door and remove the drivers side lower kick panel.
You will see a 20 pin connector there and also the central junction box.Disconncet the 20 pin connector and the 2 connectors to the central junction box and inspect them for moisture and or corrosion and clean them and add dielectric grease and see if this fixes you problem.
Not finding what you are looking for?

876 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...