At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There's this website www.reliable-store.com
They have books on ALL vehicles.
it covers wiring diagrams, electrical diagrams,
fuse diagram, torque
specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!
Remove fender well trim ( a few screws)
Remove front bumper COVER (not the bumper- the plastic cover)
About 14 screws. Mostly on the underside, get a creeper, and a few
on the top.
Remove the (left or right side) Headlight assembly ( a couple more screws).
One assembly contains the headlight, turn signal and running light. Unplug
the electrical connector from the assembly. All bulbs remove from the back
of the headlight assembly. Headlight is held in place by bail wire, smaller
bulbs are 1/4 turn.
Do you mean the entire headlight assembly or just the bulb?
If it's the entire headlamp look at the new one to see where the
fastening points are, the grill may have to be removed and also the
parking lamp lens, if it's just the bulb it's easy Open your hood look at the backof the headlight assembly and twist the bulb
holder ring to release it. Good Luck To You
most of the time the headlight assemblys are replaced because of this at my work (toyota dealeraship ) but i would try to take apart the headlight assembly very carefully by prying up the tabs and glue that attach the front to the bach then clean out and reseal, or you could try to use a clothes hanger with a small amount of cloth or paper towel taped to the end and insert through the hole where the headlight bulb goes may take some time but could save you a considerable amount of money hope this helps
there are two headlight fuses in the engine compartment fusebox. one for each side. keep an eye on them. also, go ahead and change your bulbs (wether sealed beam or Halongen swap bulbs).
×