Anti theft system not allow to stat engine

Question edited for clarity. Spelling of 'Cruiser', and 'want' to 'won't', which is a contraction of 'will not'.
Question moved to model category.

By removing the battery, you activated the anti-theft system and engine immobilizer.

https://www.fixya.com/cars/r29912554-changing_battery_not_create_problems

Put the key in the ignition and turn the key so that the [battery](/topics-battery-chrysler/) is on, but the [engine](/topics-engine-chrysler/) doesn't start. Quickly push and hold in the override button until you hear the alarm sound once, indicating the alarm is disabled.

How to reset the anti theft on Chrysler pt cruiser 2008

How to reset the anti theft on Chrysler pt cruiser 2008.

JustAnswer https://www.justanswer.com > Chrysler Repair
Feb 14, 2021 - Quickly push and hold in the override button until you hear the alarm sound once, indicating the alarm is disabled.

1 answer · Top answer: Welcome to JustAnswer Mechanical Support! I am AutoExpert20 and I will be In

Or this

https://www.google.com/search?q=mobile+auto+electrician+near+me

..

When the anti-theft system in your car is activated, it is designed to prevent unauthorized access to the vehicle and protect it from theft. The specific features and functions affected by the activation of the anti-theft system can vary depending on the make and model of your car. However, here are some common ways in which the anti-theft system can impact your vehicle:

1. Ignition Interlock: In many vehicles, the anti-theft system can prevent the engine from starting or cut off power to the ignition system. This is often the primary function of the anti-theft system to deter thieves from driving the vehicle.
2. Key Removal: Some anti-theft systems can also lock the key in the ignition switch, making it difficult or impossible to remove the key when the system is activated.
3. Door Locks: The anti-theft system may lock or unlock the doors automatically when it is activated. This can be intended to prevent unauthorized entry.
4. Windows and Sunroof: In some cases, the anti-theft system can disable the power windows and sunroof to prevent someone from gaining access to the interior through these openings.
5. Alarm Activation: If your vehicle is equipped with a security alarm system as part of the anti-theft system, it may activate the alarm if unauthorized entry is detected or if someone tries to tamper with the vehicle.
6. Vehicle Immobilization: Some advanced anti-theft systems can immobilize the vehicle by cutting off fuel or electrical power to the engine.

If you're experiencing issues with your key not coming out, windows not rolling down, and the sunroof not opening, it's possible that these problems are related to the activation or malfunction of the anti-theft system. However, it's essential to consult your vehicle's owner's manual or contact the manufacturer or a qualified automotive technician for specific information about how your vehicle's anti-theft system operates and to diagnose and resolve the issues you're facing.

In many cases, anti-theft system problems may require specialized equipment and knowledge to diagnose and repair, so seeking professional assistance is often the best course of action.

Disconnect the battery cables and wait 5 minutes then reconnect them if your alarm sounds use your key fob to stop it then you should be okay also the key you have maybe has a battery in it and it's dead if it was an aftermarket key programmed at Lowe's or home depot look at the key if you see little tabs on the bottom there's a battery in there

I think all you need to do is reset you ECM,Disconnect your car's battery by removing the positive and negative cables. Use a wrench to remove the cables if necessary. Press and hold your horn for 30 seconds to drain any remaining electricity from the capacitor. Wait 15 minutes and reconnect your battery. it wont hurt to try!

pls vote.

Instructions

1. • 1 Ensure that the doors, hood, decklid and rear liftgate are properly closed. The alarm cannot properly arm if any of the doors or other openings are not closed.
     
   • 2 Replace the batteries in the key fob to ensure that the remote is capable of arming the alarm system. If the batteries have been dead for more than a few minutes, the fob will need to be synchronized with the vehicle to function. To synchronize the remote with the car, aim the remote at the vehicle and press the lock or unlock button twice. Next, place the key in the vehicle's ignition and turn the ignition switch to the "On" position. All of the steps must be completed within 30 seconds.
     
   • 
     
   • 3 Verify that the parking lamps flash three times when the system is armed using the remote. Alternatively, verify that the alarm is armed by looking at the alarm indicator on the dash. If the alarm is properly armed, the alarm indicator light should blink.
     

You should have disconnected the battery and fully charged it before starting the car.
The low voltage may have damaged some of the electronic components in the alarm system.
Charge the battery fully, then reconnect it and see if that helps.

When you take the battery cables loose from an anti-theft system, You would place a nine volt (9V) battery across the positive and negative cables to hold the memory chip in the systems. This allows you to remove the battery for a period of time longer than a few minutes. The system (anti-theft) is designed with a couple of capacitors in the system that hold the charge for a few minutes to allow changing of the battery. If the battery is removed for much longer than 30 minutes then the capacitors drain and the memory is lost in the chips.

You are going to have to go to the BMW dealer and have them re-write your system, and it will cost you about a hundred bucks. They have the plug in device that will restore the system and it is not sold to the general public. That is why it is called ant-theft, so if someone steals your radio it quits working.

This is the problem due to your anti theft alarm system. You have not mentioned which brand of anti-theft alarm system you have? Anyhow, most of the systems have a reset switch inside the kit, open the kit and on the main board, u will find the reset button, press that and hold for 5 sec, the system will be reset. Otherwise, there are 2 or 3 fuses with the wiring of kit, remove those fuses and ur engine will wake up but the anti-theft system wont work then, hope this will solve the problem

Section 13-11: Anti-Theft System, Active 1998 Windstar Workshop Manual DESCRIPTION AND OPERATION Anti-Theft Alarm System NOTE: The system immediately monitors the ignition key lock cylinder upon removal of the key from the ignition. It is not necessary to arm the system for ignition key lock monitoring.

The anti-theft alarm system:

• protects the vehicle from unauthorized entry into the passenger compartment, engine compartment and cargo area.
• monitors the status of the ignition key lock cylinder.
• is controlled by a remote anti-theft personality (RAP) module. The remote anti-theft personality module also controls the electronic door lock functions. Refer to Section 01-14B for more details.
• when armed, detects unauthorized entry into the passenger compartment by using an input from the GEM module regarding the state of the door or liftgate (open or closed).
• protects the engine compartment with a hood switch which is located on the LH cowl vent panel and is part of windshield wiper motor wiring (17A477) .
• triggers an alarm if the ignition lock cylinder is forcibly removed from the steering column.

Once triggered, the system responds by:

• flashing the low beam headlamps, the parklamps, rear lamps and the alarm indicator warning light emitting diode (LED).
• sounding the horn (13832).
• disabling the starter circuit until the system is disarmed.

---------------------------------------------------------------------------------------------
Remote Anti-Theft Personality Module

• The remote anti-theft personality module is located behind the instrument panel (04320).
• It contains a radio receiver that receives the RF signal from the keyless entry remote transmitter (15K601) through the alarm and lock system antenna (15603) and sends the appropriate command to the power door locks, the horn relay, or the generic electronic module.
• The remote anti-theft personality module is equipped with an internal backup power supply which holds the programmed code in memory in the event the vehicle battery is disconnected.

-------------------------------------------------------------------------------
Remote Anti-Theft Personality Module Removal

1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
   

1. Remove radio. Refer to Section 15-01 .
   

1. Remove lower instrument panel center finish panel. Refer to Section 01-12 .
   

1. Lower glove box.
   

1. Remove two remote anti-theft personality module bracket retaining screws.
   

1. Disconnect electrical connectors and alarm and lock system antenna (15603).
   

1. Remove remote anti-theft personality module and bracket.
   

1. Remove remote anti-theft personality module from mounting bracket.
   

Installation

1. To install, follow removal procedure in reverse order.
   

1. Tighten remote anti-theft personality module bracket retaining screws to 6-8 Nm (54-70 lb-in).
   
   

Components The system is composed of the following components:

• remote anti-theft personality (RAP) module with integral antenna
• alarm indicator LED
• door lock cylinder switch RH, door lock cylinder switch LH
• liftgate door lock cylinder switch (220A40)
• hood switch (part of windshield wiper motor wiring (17A477))
• ignition lock anti-theft switch (19A438)

The following vehicle components are also used by the anti-theft alarm system:

• generic electronic module
• power door lock switch (14028)
• door open warning lamp switch (14018)
• autolamp relay (14N089)
• horn relay and bracket (13853) and horn (13832)
• low beam headlamps
• rear lamps (13404) and parking lamps (13200)
• starter relay
• door lock relays
• keyless entry remote transmitter (15K601)

--------------------------------
Disarming an Untriggered System NOTE: A perimeter alarm will "shut off" after 165 seconds, but the system is still triggered and is not disarmed.

An armed but untriggered perimeter anti-theft system can be disarmed by one of the following four events:

1. Unlock the doors by pressing the keyless entry remote transmitter (15K601) UNLOCK button once.
2. Unlock any door with a key.
3. Turn ignition switch to RUN or ACC.
4. The remote entry PANIC button will disarm the anti-theft system only when the perimeter alarm is triggered and sounding.

------------------------------------------------
System Triggering NOTE: Although the remote entry PANIC alarm is not associated with the monitoring of the vehicle, the user will frequently say that the theft system was triggered when actually the keyless entry remote transmitter PANIC button was inadvertently pressed. A panic alarm will not flash the THEFT indicator.

The alarm can be triggered by the following events if the system has been armed and has not been disarmed first:

• Open any door or liftgate.
• Open the hood (16612) (if the hood was open when the system was armed, it must be closed before it can trigger the alarm).
• Dislodge the ignition key lock cylinder.
• The anti-theft system may be triggered inadvertently when the module is disconnected and then reconnected. To avoid inadvertent alarm triggering, disconnect the smaller 22-way connector first.

When the system is triggered the perimeter alarm will operate as follows: The remote anti-theft personality module will pulse the following outputs at approximately 1.3 Hz, 50 percent duty cycle for two minutes 45 seconds for North America. NOTE: Other perimeter alarms can be programmed for the system.

• low beam headlamps
• parking lamps
• horn
• THEFT indicator

The perimeter alarm can be retriggered, after a perimeter alarm has sounded for 165 seconds. After a perimeter alarm has timed out, if any trigger input is first seen as normal and is then seen in its trigger state, the perimeter alarm will be retriggered. The perimeter alarm can be triggered a total of three times between an arming sequence and a disarm event. An active panic alarm will be deactivated when a perimeter alarm is triggered (a perimeter alarm overrides a panic alarm).

the anti theft control wont keep the engine from turning over if this is the case and the engine will not spin over. THEN this is not your problem. Have someone bump your starter with a obgect while you hold your key in the start postion. Before doing so make sure your battery is chared and you have good connections.