Question about 1997 Chrysler LHS
I dropped my remote to my car. Remote is not visabily broken, the batteries came out. Put them back in and not working. Now my car will start but only run for a few seconds, I replaced the batteries with new ones, but factory installed alarm/anti-theft system is not letting me drive my car. Please help. I need to get to work. Signed Desperate in VA
Posted by Anonymous on
I think all you need to do is reset you ECM,Disconnect your car's battery by removing the positive and negative cables. Use a wrench to remove the cables if necessary. Press and hold your horn for 30 seconds to drain any remaining electricity from the capacitor. Wait 15 minutes and reconnect your battery. it wont hurt to try!
Posted on Oct 09, 2017
Try removing the alarm system relay, some car alarm has also a fuse on the alarm that you can remove.
Many car alarms unlock by inserting and turning car key while you connect the battery.
Posted on Aug 19, 2008
SOURCE: 1997 Sebring starts, then stalls
You need to disarm the alarm, the 2 problems are related, the start and stall is caused by the fuel pump interupt function of the factory alarm, you triggered it when you replaced the battery, The reset procedure is in the owners manual.
Posted on Nov 18, 2008
SOURCE: program remote 1996 chrysler lhs
Setting in the car remote in hand turn the key on and off ( don't start the car ) three times within 5 seconds. Now press the door lock button until the doors lock and stop it should now work.
Posted on Oct 03, 2009
turn the key on leave it on for 10 to 20 min.s after yo wait then turn key off and then try to start the car this shoud work. it will reboot the computer.
Posted on Sep 25, 2010
Tips for a great answer:
Dec 08, 2016 | 2011 Ford Escape
Oct 09, 2016 | 2009 Pontiac Vibe
Jul 16, 2017 | Cars & Trucks
Oct 07, 2012 | 1997 Honda Prelude
Sep 03, 2012 | 2003 Dodge Grand Caravan AWD
Jan 30, 2018 | Cars & Trucks
Oct 22, 2011 | 1999 Chrysler LHS
Dec 18, 2010 | 2002 Mitsubishi Galant
Nov 18, 2010 | 2006 Chevrolet Impala
335 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: