Question about 1991 Geo Tracker

1 Answer

Turn signal switches

My turn signal switch went out on my 94 geo tracker and im not sure how to install it. do i have to take apart the whole steerling wheel?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

No.first off remove horn pad in centre of steering wheel and remove steering wheel Do Not hit steering shaft to remove,use puller or wiggle it off.Remove the bottom steering wheel cowl/shroud below steering wheel.Lower the steering column by removing the two torx head bolts located under the dash.Remove the two upper and lower screws that hold the switch to the column.Unplug switch and assembly is reverse of disassembly.Good luck let me know if you need more help

Posted on Nov 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need free wiring diagram for a 1996 geo tracker


for the whole car? its huge.
but you are in luck ,
someone, (not me) scan the paper book to PDF
the only book on trackers ever done by a very motivated guy
took him a week to do that, im sure.
as you may not know but Geo nor suzuki used PDF then. ever.
since 2007
http://www.acksfaq.com/trackerfsm.htm

1996 scanned, with full schematics.

Apr 10, 2014 | 1996 Geo Tracker 2 Door

2 Answers

94 geo tracker headlights won't turn on


You would need to use a meter or test light to find out if you have power going thru the headlight switch and thru the dimmer switch.

Dec 25, 2012 | 1994 Geo Tracker

1 Answer

Back up lights on my 94 tracker will not turn on


check the bulbs if they are good . it is your neutral safety switch

Dec 16, 2012 | 1994 Geo Tracker

3 Answers

I need a diagram of engine timing marks for a 1.6 litre engine


1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl

2efa731.jpg

Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2) is aligned with the notch (3) on the inside timing belt cover (4) ...

5a2ee07.jpg

Fig.: ...and ensure that the crankshaft sprocket (1) timing mark (2) is aligned with the mark on the oil pump (3)

For more details, can register in autozone.com (free).

I hope help you with this (remember rated this help) Good luck.

Oct 15, 2009 | 1996 Geo Tracker 2 Door

1 Answer

Cant find the inertia switch


there is not one.

submit problem , dont guess.

i have full docs on this car.

you need to say 8vavles or 16 valves or questions are useless .

Apr 22, 2009 | 1994 Geo Tracker

4 Answers

Reset check engine light on 1995 geo tracker


I had the very same problem with my 94 tracker and it turned out to be something simple. My check engine light had popped on after it had hit 100,000. I went through all of the suggestions that people had suggested (unplug battery......etc) and still to no avail. Searching the internet, I came across a website called suzukiforum.com and there, this guy was able to help me with my problem. It turned out to be a maintenance switch that kicks on every 50,000 miles. This switch is like a secret that the auto manufactures use to ploy owners of their cars to bring to the dealer and then rack up the dollars in unnecessary "repairs". The switch is located under the dash and can be hidden anywhere. From the assistance of the guy on the forum, he was able to send me photos of this damn switch and possible locations where it may be mounted. I found mine in about 5 minutes, where it was attached to the steering column. It's a tiny switch, that you slide up or down, depending on what position it is in upon finding it. If it's up, then slide it in the down position and visa versa. Once you do this, the check engine light will go off. Make sure you do not have the car running and you can even unhook one of the battery posts, just to make sure you don't hit anything while rooting around under the dash. Good luck!

Apr 16, 2009 | 1993 Geo Tracker

1 Answer

94 Geo Tracker is getting gas to the throttle body but will not get gas or voltage to the injector?


dead Injector 8valve.

use a NOID lamp to see if ECU is pulsing this
injector.

http://carfix.stufftoread.com

see line that says injectors....xxxxxx

May 26, 2008 | 1994 Geo Tracker

1 Answer

94 geo tracker with brake light on


THERE IS A SWITCH UNDERNEATH THE STEERING COLUMN THAT WILL CORRECT THIS PROBLEM. I BOUGHT MY 1994 GEO TRACKER 4X4 BRAND NEW. IT TOOK ME SEVERAL SERVICE APPOINTMENTS FROM MY DEALER BEFORE I GOT THIS INFORMATION FROM MY MECHANIC.

May 20, 2008 | 1994 Geo Tracker

Not finding what you are looking for?
1991 Geo Tracker Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...