Power windows and sunroof stopped working - 2006 Nissan Altima

Here is your answer from Just Answer. Exactly the same issue and caused by the 'RAP Relay' (Retained Accessory Power).

https://www.justanswer.com/pontiac/atv7z-power-windows-sunroof-stop-working-25a-fuse-back.html

It is located in the Passenger Side Fuse Box.

https://fuse-box.info/pontiac/pontiac-grand-prix-2004-2008-fuses-and-relays

....

If you want to solve your problem, click on the link I attach-

https://www.reliable-store.com/products/2012-honda-accord-tourer-workshop-repair-service-manual-pdf-download

Here's a description the sun roof
Power Sunroof System Components
The power sunroof system consists of the following components:
• Sunroof module
• Sunroof switch
• Sunroof motor, with 2 hall effect sensors and limit switch
• Sunroof window
• Sunroof sunshade panel
• Power supply for the sunroof module: RAP 25 A
• Ground G402

Override
The override function is used when needing to force a closing of the sunroof window. To override the system:
Turn ignition to ON.
Rotate the sunroof switch to the close position.
Press upward.
The sunroof switch data 6 circuit, or override circuit, will become grounded at the sunroof module. As long as the sunroof module sees this input, it will continue to slide the sunroof window to close, regardless of the other sunroof switch data circuits inputs.

Most automotive glass shops can repair for a reasonable amount. A deaerl will do it for 5 times as much.

Could be the switch control panel ,check for power with a test light.

anti lock wire may have shorted or unplugged n it may be where honda grounded all that. check plug by brake cal

hey did you ever figure this out? Im working on the same problem right now... have power to the sunroof and just replaced the 25amp circuit breaker that is right after the sunroof... I have a circuit diagram if it would help you at all

Don't know Saturns well, but could be a "fusible link" blown. These are in side power wires usually near battery or starter motor.

check your fuses

start by checking the fuses