Nissan Cars & Trucks - Recent Questions, Troubleshooting & Support


Do you hear it click or do anything when the release button is pushed? If not remove the inside trim panel and do a manual latch release so you can diagnose the issue.

Nissan Armada... | Answered 5 hours ago


Who makes this?

2004 Nissan... | Answered 5 hours ago


Camshaft position sensor is located in the cylinder head let me know if you find it to put some pictures later

Nissan Sentra... | Answered 6 hours ago


Take it to a pro or Buy Seafoam to put it into your intake

Nissan Cars &... | Answered 10 hours ago


Are you saying that the clutch is not working so that you cannot change gears while the car is running? With the engine stopped, and the car not moving, can you shift the transmission into the other gears? If this is so, then your problem would be a hydraulic or cable malfunction with the operation of the clutch system. If you have a hydraulic system, make sure that you have fluid in the clutch master cylinder and that it is working properly. If it is a cable system, make sure that it is working. c

Nissan Cars &... | Answered 10 hours ago


yeah.. what he said..man I feel like will smith in the movie indepenence day..

1999 Nissan... | Answered Yesterday


I assumed the you have a new battery because battery can also cause problem even if you think you are using a new one.It sounds like the problem also lies on the fuel supply. Fuel pump maybe playing foolish. You may need to have your fuel lining check and clean using air compressor. Fuel filter may be clogged already and fuel can't pass freely.

Nissan Cars &... | Answered Yesterday


I think intake air control ???? We don't think ! WE TEST TO KNOW FOR SURE ! What , you read the code an because it stated P1111 NISSAN - Intake Valve Timing Control Solenoid Valve Circuit Bank 1 , you replaced the part . That is not what this code is telling you . Looking up the code in the factory service repair manual an testing the electrical circuits is what should be done .

Nissan Cars &... | Answered Yesterday


Check the storage, or electrical parts fuse below the steering wheel area. Replace the remote battery, pay attention to polarity. there is a plus + sign on the back case. then hold the lock and unlock button few seconds untill lights on car flash. then when you replace the remote , to program a new one, close door, use lock button on door to lock, put key in ignition, then remove ten times untill the turn signals flash, then put key in, turn ign to 1st position accessory, then push a button on 1st remote, then unlock lock with door button, then push a button on second remote, turn off ignition open door the it is done. be sure that car battery has more than 12 volts and test the key in reminder does ding and work ok when key put into ignition sw. when trouble shooting

Nissan Cars &... | Answered 2 days ago

Not finding what you are looking for?
Nissan Logo

75,349 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2005 Nissan Altima
2005 Nissan Altima

1,524 Questions

2003 Nissan Altima
2003 Nissan Altima

1,414 Questions

2000 Nissan Maxima
2000 Nissan Maxima

1,263 Questions

1995 Nissan Maxima
1995 Nissan Maxima

1,088 Questions

2002 Nissan Altima
2002 Nissan Altima

1,258 Questions

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

83644 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22393 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...