Grundig Audio Players & Recorders - Recent Questions, Troubleshooting & Support
Pressing on power on/off would cause radio to come on for two seconds then off
I had similar problem with my S350. It was a component which had failed. I found a place that fixed it at a reasonable cost. It is ACT Electronics in Long Beach, CA. I don't have phone number but you can google it. It is run by a person from India. You send him the radio with a $30 check. He then assesses what is wrong, gives you a price to fix it, send him a check, then he fixes and sends you the radio. He did a fine job for me. Good luck!
on Dec 24, 2019
Grundig Satellit 500 loses reception
I had such a pb.
IC 103 CX7961 stopt to oscillate after ~30s ...
so the plls ref was out
I changed it without results
In fact the plastic trimmer C138 (4-20pf) was bad???( insulation?)
Since changing (10 years ago) : no problem
on Apr 01, 2019
Grundig Classic 960 Mfg 2000, Powers On , But Only Faint Hum Can Be Heard. What Should I Start With First ?
Don't continue powering it up. The hum is the transformer that powers the circuits. There is a failed electronic component which is causing the audio to be absent. The radio this was copied from was a tube radio and none of the original components are the same in this solid state copy. The problem is most likely in the audio amplifier section of the circuit board, but being most likely surface mounted components like all modern manufactured radios finding and isolating the fault will cost you more than buying a replacement.
on Jan 18, 2019
Grundig g2 won't turn on
I have been searching as well, to date, it still won't power on even after replacing the battery, getting a charger and charging the old battery. I also used the reset button and no help. I asked Grundig / Eton for help a couple of times and no response. Very disappointing, it is like Grundig isn't around any more or won't support their own products any more.
Grundig NG2B G2...
on Aug 19, 2018
Not finding what you are looking for?