Foxconn Computers & Internet - Recent Questions, Troubleshooting & Support

0helpful
1answer

Where can i get the manual for the winfast motherboard n15235 ?

there is no such mobo, n15235, ever, that is electrical cert code for Australiayes bingo this: Foxconn 6627MA-RS2H ???>????and foxconnchannel.com went dead 2012. for DIY MoBo.winfast is product line that sells foxconn too but is dead also.....double dead.and triple dead if our unstated OS does not support this relic chip sets./Foxconn 6627MA-RS2H (real name this is) 2006 made.next time buy ASUS, and win, ok/?the echo of the manual is there, lucky you. free too.https://www.manualsdir.com/manuals/768416/foxconn-6627ma-rs2h.html?page=2Pentium D is max best. herethe bad news is this lame chip not supported now.SiS662 (North Bridge) + SiS966L(South Bridge)966 is at vista max. 662 is ends at XP 32bit.and 64b it.RIP 662 , but some linux is supported. seen here/no SSL certs but is ok there.. they ended support so did not go SSL is why and costly.http://w3.sis.com/download/its nice they still pay for this domain, shocking that.so is this correct Foxconn 6627MA-RS2H many folks post here using wrong mobo modeldid you?n15235<<< and this is 100% USELESS max.
5/30/2022 11:38:22 AM • Foxconn... • Answered on May 30, 2022
0helpful
1answer

N15141 drivers

N15141, is not a model is Australian elect, certs codes, a useless number.g41 is old intel chip set, 3.2GB max DDR memoryno model mobo told./ at all (sticker labels not told)no answers easy butfoxconnchannel.com is dead, now, 2012 it died.ended DIY support, we guess for ever, dead 10 years.drives for what OS, not told, xp,vista,w7 or w8?windows 7 sure.,. linux?drivers are a 3 way match.the MOBO and its chip sets , vast,The OEM makers, supportand the OS.all three must match, unless using USB or VIDEO cardsbut no OS told at all.The G41 can run w10 is some rare cases. (best CPU there)2010 or newer PCs or mobo are best not old.G41 is a 2008 chip.the VGA chip there is unknown not telling real mobo model,nor if using a GPU card, VGA.?they used many then. sorry can not guess mobo models me.
5/13/2022 12:52:42 PM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

What drivers do i need for this motherboard if i install win7-64bit OS

NO OS told at all, not one clue, and w7 is maxbut not told. windows 8 up i no good here.driver match OS + chips + oem mobo design.a 3 way match, yes there are ways to cheat but I will not type 10 pages of text to do that. sorry.why not just try first see what fails and work thoseload to ssd drive and is 30mins work too top all that, w7.It will not catch fire, loading w7.great question but foxconnchannel.com DIY mobo went dead 2012.so support ended then.if mobo came new in OEM PC say so and maker name and model.we can not guess OEM mobo, like you present.Foxconn M61PMV (2008 new)coin cell 6years old , and can be good.Support AMD socket AM3/ AM2NVIDIA GeForce 6100/ nForce 430Realtek 6-channel audio chip (M61PMV-E)Nforce is dead now.but the last AMD driver, MS ended support to , due to AMD endsok here it the the last Nforce driver from AMD, official sitehttps://www.nvidia.com/Download/driverResults.aspx/14875/en-ussee that. vista 64bit and,yes w7 there.
5/13/2022 12:29:18 PM • Foxconn M61PMV... • Answered on May 13, 2022
0helpful
1answer

K7s741 mg no video output

Foxconn K7S741MG-6L Motherboard, 2004 new day1 relic?is this true?, and yours or posted wrong model?.NO VGA out? at mobo or the video card?yes k7 , winfast board>?answers, SIS chips there are not supported, by (ALL)No PCI-express slots at all , just AGP.(BAD)1/2 of all AGP cards made will not work here, (dang)no SATA ports, just relic IDE(PATA). sad max. and the coin cell is dead at 10 year old now 2014 2014-2004=10 , spec is 7 year life so its dead and now BIOS goes MAD.(even igpu dead vga rear)just found a raw mobo in a garage sale>??sure.foxconn DIY sales, went dead 2012.no video connected how , NOT TOLD , fail. and now double dead, the mobo ended all support, gee how can they if SIS died. really/? nobody can !and this too DEAD....https://www.foxconnchannel.com/buy a i3 mobo 2010 and newernever buy into, SIS, VIA or Nforce ever.it's junk mobo for only XP.I will now tell this, horror, back in 2004 !the VGA out is hard to get working on most then.let me tell you why, (yes horrors of AGP)1: 1/2 the AGP cards fail here unless from Foxconn.2:the bios must be forced to the VGA you want to use and there are 3 choices then, igpu ,agp and pci slot.one is the default and there was NO AUTO mode then.best is to reset the MOBO using a new fresh coin cell RTC battery and then no APG card there at all.and hope the igpu works.(mobo rear edge I/O plate VGA)3: on some mobo (yes) I had to use very old PCI card, like this one for $10 usedATI Radeon 9000 64MB PCI Video Graphics Card, With VGA, DVI & S-Videothis last trick if needed allows VGA bios to workand then in the BIOS video page set it as you wantend legacy ,topic, PCI (non-express) video.PCI old, is gone and forgotten now.PCI-express modern/ 2003/4 up.but not yours.avoid all AGP. the maker had a QVL on AGP that shows, only tiny list of allowed, and is max pain all that.even bios updates that do not exist now..
5/13/2022 12:15:37 PM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

Foxconn g31mv-k motherboard

they died in 2012 but gee no question asked at all.for DIY mobo onlyhttps://www.foxconnchannel.com/if removed from real OEM PC , then ask them for supportno pC told at all , or how you found a raw MOBOnor why posted as raw. mobo only..buy a i3 and up mobo, 2010 year up and win.has a future.
5/13/2022 12:05:31 PM • Foxconn G41MXE... • Answered on May 13, 2022
0helpful
1answer

Drivers n15235

n15235 is not a model mobo at all that number is the Australian electrical safety certs. https://www.foxconnchannel.com/ is now dead, no more books, driver, or bios forever gone. dead.
5/13/2022 12:04:03 PM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

Foxconn g41mxe bios

foxconn diy shut down 2012 foxconnchannel.com http://www.foxconnchannel.com/ https://www.foxconnchannel.com/ Registry Expiration: 2023-09-08 23:50:45 UTC thjey are dead, EOL, ended not the company just this product like DIY, RAW mobo. dead it is. no books no drivers , no bios upgrades. just be happen it works, still.
5/13/2022 12:02:30 PM • Foxconn G41MXE... • Answered on May 13, 2022
0helpful
1answer

Foxconn n15235 front panel jumpers

n15235 is not a model number everthat is an Australian, electrical safety compliance code. and 100% useless .foxconnchannel went dead 2012. they stopped dead DIY mobo sales, and the wiki said so too.the manuals are all lost now./ but googling finds some. but no model told, no JOY.lost the CD too , new in the box it had one, with PDF on CDlost that?, yes, ouch./or get the real foxconn, model number mobothe google that and add the word manualand bingo all jumpers told. some foxconn mobo are called contract OEM mobothe top makers of OEM PC ordered those custom and put them in their PC and the only clue is the lack of any DIY foxconn model on the board at all.that n15235 is NOT IT.learn to post photos of the mobo and all labels there.
5/13/2022 11:55:54 AM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

Foxconn 6100K8MA/6100M2MA/6150K8MA/6150K8MD Series

ask a question? who,what ,where,why, how,, etc
5/13/2022 11:52:56 AM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

Foxconn 945P7AA Series

ask a real quesstion foxconn shut down , DIY mobo sales. 2012. so the that lil' bummer.
5/13/2022 11:52:17 AM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

H57m01a1

2012 foxconn went dead for mobo sales, Raw.and all manuals are lost now.RIP foxconn mobo. direct support.the only hope is googling for a week.so lost the front panel did you? cables and all/.lost the PC case too from ACER? not told that.that mobo # decodes to thisFoxconn H57M01A1-1.1-8EKS3H H57M01 Acer Aspire M5811 Socket LGA1156 Motherboard 2009 made.H57 chip set is good. clarksdale I5 on board.that means it is not DIY boardit is ACER boardand only they document this as that is a contract boardbuy it off ebay and seller lied? no kidding.acer.com and andpage 70 is what you get. and page 71, shows the 14 pin names there. for sure.https://www.manualslib.com/products/Acer-Aspire-M5811-2281645.htmlyes ebay sellers ,sell PULLS and forget what the mobo came out of(dang) and then you buy it and land here.
5/13/2022 11:51:21 AM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

Pc h57m01a1-1.1-8eks3h

some boards are out of OEM PCs like gateways or the like others were sold as DIY from foxconn direct sales. did you lose the PC case? or buy just a mobo , raw? front panel pinouts you meant but failed to say just what:? foxconn (channel) went dead. 2012 the maunuls where there, then, and now all gone. they are gone. all is gone but the echo, (waybackmachine) old Intel P55 / H57 chipset age ,2009, and lost manuals, are are not, lost 2012 year when the went dead. no can find, me....
5/13/2022 11:50:16 AM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

Overclocking settings foxconn 662 7ma bios phoenix technologies version 6.00 chipset sis 662 intel celeron 331

there is no answer to that. no 2 CPUs on earth overclock the same amount nor way. best is not OC< and learn to just compute and be happy? old chips sets are 4GB max ram and useable to 3.2GB the data sheet on your PC, for the north bridge tells you that it PCI devices, or iGPU can steal RAM from main, to form up. vRAM it even says the word steals. (intel pages) find OC forum real and read. 1billion words to nowhere fast. have fun with BSOD , endless. and random or hard worked hot.
5/13/2022 11:27:50 AM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

Sumitomo awm 2896

there is no such thing, it is factory molded in PLASTIC. Why would you trim it , nobody does on earth,? colors yes, trim no.
5/13/2022 11:22:27 AM • Foxconn Lot 10:... • Answered on May 13, 2022
0helpful
1answer

Foxconn 6617mj drivers de audio

New in the box that mobo had the CD there, (sound drivers) lost sure. NO OS told , so we are asked to guess the OS, really? windows 7? ?????????????????????????????????? foxconn ended DIY mobo support, they ended that website tool. foxconnchannel? you posted just the mobo model, only, that implies it not a full PC case , PSU and all the trimmings are missing.? Foxconn 945GZ7MC-RS2H ???? or 6617mj? <<< where is this seen,,,???? SIS audio is on some of these and SIS is dead now, DOA, EOL. SIS was 7102 chip set. sound; not support w7 up. period. this chip:? Vista is max. Realtek Semiconductor Corp. High Definition Audio System Software Ver:R1.91 Installation and Setup for 945GZ7MC-RS2H drivers Installation/Removal Procedure For Realtek High Definition Audio Codec: im guessing 945GZ7MC-RS2H (the R means Realtek audio option) see link to this file , see readme.txt in the zip, 2009 release. last. https://www.helpdrivers.com/english/download/ the sis 661 is here http://w3.sis.com/download/download_step1.php?id=155808
5/13/2022 11:20:28 AM • Foxconn... • Answered on May 13, 2022
0helpful
1answer

I have a Foxconn 945G7MA-8EKRS2

bad caps can not work ever. 945 intel chip set is EOL. 2008 is Capacitor plague year. millions suffered;.FOXCONN ENDED SUPPORT 2019 FOR THEIR DIY BOARDSsee examples herewiki the Plague
5/11/2022 4:06:37 PM • Foxconn... • Answered on May 11, 2022
0helpful
1answer

I need to be able

OLD POST CUBASE no version told a travesty that.!no answers, but not told you it is" GPU hardware acceleration."use the word GPU,.as CPU has "speed step and more" but you can only do that if the GPU card has it like my GTX1650 has.there is no intel 945 chip set , support, at all, now, or then 2017zero not even w7 so says intelwhy not ask CUBASE what they need ,they wrote the app and complied it and only they know this. ask for minimum system spec. just all games do.the OS must support it, seen herehttps://www.avs4you.com/blog/hardware-acceleration/this is German made softwaremy guess is w10 64bits ??? must I guess????iGPU can not be removed , in PC 2010 or newerbut yours is the useless relic , CPU, GPU. 945G7MA-8KS2Id say CUBASE hates P4 pentium 4 from, 2002.that mobo is pure relic junk at $1 value usedand maker ended support in 2019 foxconn./4GB ram min.v11 min, Intel Core i series (i3 up, not p4 ever)not core2, either. 2009 or older of any kind.v9 samev8 ,core2 min, and up. sure.v7 same core2. lower ver I don't know.yes, in BIOS, most PCs have this, iGPU1: auto2: IGPU aka, onboard or on CPU die)3: PCIe, GPU.set it as you like and most PCs made on earth do not have full BIOS manuals, (asus, excepted)some or none is par.i stop here googling this for you.you can not turn off GPU acceleration because1: not used. by CUbase2" nor was it there in 2002, only dream there if that.windows should say, NOT THERE, only. gray means that.this feature is used extensively in BIT coin, mining.and for of my dvd/br DISK DECRYPTORSand more and only to modern cards do this. $$$$my guess not reading the cubase MANUAL IS THE PROBLEM ONLY, NOT READING PAGE, MIN SYSTEM AND NOT READING PAGE ON HARDWARE ACCELERATION CHOICES.
5/11/2022 3:24:48 PM • Foxconn... • Answered on May 11, 2022
0helpful
1answer

No Speaker Sound

well the drivers at foxconn are now GONE. nobody runs XP now on earth. it is a virus magnet. do ear buds fail this is test $1, takes power or batteries as speakers, or real 3.5mm head phones wired. speakers later not now testing when dead. green jack is it;. this trash mobo is SIS based and SIS is DOA / EOL for ages. never buy via or SIS or Nforce based mobo ever they are trash now, send it back, and ask for what to buy first, not spend hard cash on trash, ok>? its the YUGO car of MOBO siS761GX+SiS964 ch (OUCH) AC97 SOUND COMES FROM THE 964 CHIP. and is wired up by foxconn that means only there driver works for XP, not from SIS as they are dead. the problem is most drivers seen for XP are infected, 99% pure. like ivory soap warning I TOLD YOU this. MS ended XP support in 2014 that is strike 1. strike to is SIS is dead and strike 3 is , XP drivers in the wild are INFECTED. https://www.sis.com/DriverDownload.aspx sis 2012 set it oldest support\ed
5/11/2022 2:11:59 PM • Foxconn... • Answered on May 11, 2022
0helpful
1answer

Audio wiring foxcom n15235

n15235, useless this.that is electrical certs numbertop of mobo has stickers only THEY matter.but sorry if is Foxconn 6627MA-RS2H (2007 made) SiS 662 Pentium D / Pentium 4 HT / Celeron D DDR2 667bad news SIS is dead now and so is foxconn diy mobo support by them 2019 they ended DIY kit business.you need the Audio port jacks from the front panelnot the rear that is a standard, green is output. end story there, pink mic. etc.you lost the CD out of the new box I see, so lost the PDF manual there too, ouch.then answer for pin header, markedAudio Interface: F_AUDIOis herehttps://manualmachine.com/foxconn/6627mars2h/1611735-user-manual/Audio Interface: F_AUDIOFor 6-Channel (optional)The audio interface provides two kinds of audio output choices: the Front Audio, the Rear Audio. Their priority is sequenced from high to low (Front Audio to Rear Audio). If headphones are plugged into the front panel of the chassis (using the Front Audio), then the Line-out (Rear Audio) on the rear panel will go offline. If you do not want to use the Front Audio, pin 5 and 6, pin9 and 10 must be shorted, and then the signal will be sent to the rear audio port.see graphic of jack same page.
5/11/2022 1:53:23 PM • Foxconn... • Answered on May 11, 2022
Not finding what you are looking for?
Foxconn Logo

2,343 questions posted

Ask a Question

Usually answered in minutes!

Top Foxconn Computers & Internet Experts

Mehandi Husain ...

Level 3 Expert

1654 Answers

Muzahura Frank

Level 3 Expert

2071 Answers

Mike

Level 3 Expert

4383 Answers

Are you a Foxconn Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...