Electric Garden - Page 2 - Answered Questions & Fixed Issues

Google it. Plenty of video and manuals.

electrics do not have enough power to be brush cutters

cord driven --- problem start / run capacitor battery --bad contacts , motor bushes wearing out

you will need to ask your local dealer .

check fuse then if good check to see if motor is stuck small screw driver thru the open end of motor it has slots in it I have one that sticks every time i use it

measure the diameter and buy one thats the same

for???

Google make model replacement parts and make model parts schematic to see how it all fits together

ANYI HAVE SEEN ARE 10 NCH ONLY

FIXYA IS NOT A WEEDEATLER RETAILER AND SELL NOTHING

The motor can only spin in one direction! It looks like the blade is fitted the wrong way round! Take it off and put it back properly!

https://www.youtube.com/watch?v=uaADxm3UCcQ https://www.youtube.com/watch?v=uaADxm3UCcQ

https://www.youtube.com/watch?v=xu0zLVsxFGY https://www.kijiji.ca/b-ontario/yardworks-electric/k0l9004

I would say yes. Set the tilt first, then the angle. Check out some YouTube videos showing how to sharpen chains. Good luck

Turn it over and clean the caked grass off, thentry it.

there should be a bolt on the bottom of the clutch pulley that holds it on. be sure to unplug it first as they are fairly heavy. if it wont just slide off sometimes you may need to pry it off . there are a lot of videos on you tube that show this job.

Go to harbor freight’s website. I’ve bought parts for there stuff before. Or just buy a new one

https://images.homedepot-static.com/catalog/pdfimages/ea/ea22e764-0cc7-4919-9ee4-372aebe0cb30.pdf

These Portland brand chainsaws were manufactured for Harbor Freight. Like all Harbor Freight products, getting parts for them is a bit of a challenge, as the products are only available for a couple of years and then no longer manufactured, with parts no longer being available. You can try contacting Harbor Freight and inquiring as to whether parts for your particular model are still available or not. - Contact Harbor Freight Tools 1-800-444-3353 6-6PM PST

Better check with the store or the manufacturer. Hope you still have your bill.