Electric Garden - Answered Questions & Fixed Issues


I would say yes. Set the tilt first, then the angle.
Check out some YouTube videos showing how to sharpen chains.
Good luck

Electric Garden | Answered on Feb 02, 2020 | 15 views


id made offshore most likely they are yes. find a local hydraulic shop in your area and take them there to size new ones

Electric Garden | Answered on Jan 02, 2020 | 24 views


ASK AMAZON.COM WE DO NOT KNOW

Electric Garden | Answered on Nov 05, 2019 | 33 views


battery voltage at least 12.4 volts??

Electric Garden | Answered on Oct 23, 2019 | 59 views


Turn it over and clean the caked grass off, then
try it.

Electric Lawn... | Answered on Oct 12, 2019 | 468 views


there should be a bolt on the bottom of the clutch pulley that holds it on. be sure to unplug it first as they are fairly heavy. if it wont just slide off sometimes you may need to pry it off . there are a lot of videos on you tube that show this job.

Electric Garden | Answered on Oct 08, 2019 | 57 views


Google (wen)(1100)(manual) without parens.

Electric Garden | Answered on Oct 01, 2019 | 50 views


Go to harbor freight’s website. I’ve bought parts for there stuff before. Or just buy a new one

Electric Garden | Answered on Sep 25, 2019 | 51 views


These Portland brand chainsaws were manufactured for Harbor Freight. Like all Harbor Freight products, getting parts for them is a bit of a challenge, as the products are only available for a couple of years and then no longer manufactured, with parts no longer being available. You can try contacting Harbor Freight and inquiring as to whether parts for your particular model are still available or not. -

Contact Harbor Freight Tools
1-800-444-3353 6-6PM PST

Electric Garden | Answered on Aug 19, 2019 | 42 views


Better check with the store or the manufacturer. Hope you still have your bill.

Electric Garden | Answered on Jul 11, 2019 | 20 views


Remove the outer cover and either set it out in the sun or bring it indoors to completely dry out. May take several days. Unplugged rotate the blade once it is dry and then try it. You may have to lubricate any bearings on the motor.

Last resort - spray inside the motor lightly with WD40

Electric Garden | Answered on Jul 11, 2019 | 16 views


I could possibly give you a direct link to it if I knew the model and make of the pressure washer. I suggest doing a Google search 4 just the words that contain the make and model number and the word PDF. For instance Husqvarna 3572 PDF

Electric Garden | Answered on Jul 04, 2019 | 21 views


Please give make and model to further assist you.

Electric Lawn... | Answered on Jul 01, 2019 | 519 views


Height adjustment is done at the wheels. May have extra holes or a slide system. Dont know what you have so guessing since every mower i ever worked on has holes or a slide where you have to press a lever and turn the bar to go up or down.

Electric Garden | Answered on Jun 09, 2019 | 32 views


The GFCI has failed (which is quite common on Chinese electrical) Buy another brand and ensure that it has UL and CSA approval. The power cord on yours states what Gauge wire it is, but it is much smaller.

Electric Garden | Answered on Jun 02, 2019 | 20 views

Not finding what you are looking for?
Electric Logo

Ask a Question

Usually answered in minutes!

Top Electric Garden Experts

Steve Oakes
Steve Oakes

Level 2 Expert

233 Answers

dannydoesita

Level 3 Expert

775 Answers

sgtstrat

Level 1 Expert

34 Answers

Are you an Electric Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...