Electric Garden - Recent Questions, Troubleshooting & Support


make model replacement parts


make model parts schematic

to see how it all fits together

Electric Garden | Answered on Jan 28, 2021


Electric Garden | Answered on Nov 21, 2020

The motor can only spin in one direction!
It looks like the blade is fitted the wrong way round! Take it off and put it back properly!

Electric Garden | Answered on May 31, 2020

I would say yes. Set the tilt first, then the angle.
Check out some YouTube videos showing how to sharpen chains.
Good luck

Electric Garden | Answered on Feb 02, 2020

Remove the chain, then see if it will turn over by hand. Does it have a chain-brake??? Frankster016

Electric... | Answered on Dec 01, 2019

motor is seized or rusted

Electric Garden | Answered on Oct 20, 2019

Turn it over and clean the caked grass off, then
try it.

Electric Lawn... | Answered on Oct 12, 2019

there should be a bolt on the bottom of the clutch pulley that holds it on. be sure to unplug it first as they are fairly heavy. if it wont just slide off sometimes you may need to pry it off . there are a lot of videos on you tube that show this job.

Electric Garden | Answered on Oct 08, 2019

Go to harbor freight’s website. I’ve bought parts for there stuff before. Or just buy a new one

Electric Garden | Answered on Sep 25, 2019

These Portland brand chainsaws were manufactured for Harbor Freight. Like all Harbor Freight products, getting parts for them is a bit of a challenge, as the products are only available for a couple of years and then no longer manufactured, with parts no longer being available. You can try contacting Harbor Freight and inquiring as to whether parts for your particular model are still available or not. -

Contact Harbor Freight Tools
1-800-444-3353 6-6PM PST

Electric Garden | Answered on Aug 19, 2019

Better check with the store or the manufacturer. Hope you still have your bill.

Electric Garden | Answered on Jul 11, 2019

Remove the outer cover and either set it out in the sun or bring it indoors to completely dry out. May take several days. Unplugged rotate the blade once it is dry and then try it. You may have to lubricate any bearings on the motor.

Last resort - spray inside the motor lightly with WD40

Electric Garden | Answered on Jul 11, 2019

I could possibly give you a direct link to it if I knew the model and make of the pressure washer. I suggest doing a Google search 4 just the words that contain the make and model number and the word PDF. For instance Husqvarna 3572 PDF

Electric Garden | Answered on Jul 04, 2019

Not finding what you are looking for?
Electric Logo

638 questions posted

Ask a Question

Usually answered in minutes!

Top Electric Garden Experts

Steve Oakes
Steve Oakes

Level 2 Expert

234 Answers


Level 3 Expert

777 Answers


Level 3 Expert

4372 Answers

Are you an Electric Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides