Conair Lands Phones - Page 6 - Recent Questions, Troubleshooting & Support

on line manual

this is a software fault its become ok by formating of ffs. go market & do it

Normal 0 Conairphone Digital Answering Machine -- Model TAD2018CG
http://www.conairphone.com/Pages/quick_reference.html (try TAD920)

Answering System Operation

A. Recording your personal outgoing announcement

1. Press and hold down the ANNOUNCE control.
2. After the beep, speak towards the front of the base; you have 30 seconds.
3. When finished, release button. Your unit will play back your announcement and reset to
answer incoming calls.
4. Adjust volume control on the side of the unit to set the speaker to the desired level.

B. Setting the Voice Time/Day Stamp

1. Press and hold the TIME/REPEAT control for 2 seconds until you hear "Monday 12:00 AM".
Release the control. Press and hold the On/Off Control until you hear the correct day.
Release the control.
2. Press and release the TIME SET/REPEAT Control. Press and hold the ON/OFF Control until
you hear the correct hour.
3. Press and release the TIME SET/REPEAT Control. Press and hold the ON/OFF control until
you hear the correct minute.
4. Press release TIME SET/REPEAT Control. Press and hold ON/OFF Control until you hear PM.
Press and hold PLAY Control to return to AM.
5. Press and release the TIME SET/REPEAT Control to complete procedure. Unit will prompt
the day and time.

Hello,
Here is the link to the manual

http://www.conairphone.com/IBs/digital_answering_systems/tad2018.pdf

Download it and save it.

Hope it helps

Hello,
Here it is.



To erase messages.

Hello,
Here is a link to the manual.
http://www.conairphone.com/IBs/digital_answering_systems/tad2018.pdf

Hope it helps

Hello,
The time of day has been reset during powerdown. Here is the link to the manual if you need it to reset time.

http://www.conairphone.com/IBs/digital_answering_systems/tad2018.pdf

Hope it helps.

hello,
Here is the link to your manual
http://www.conairphone.com/IBs/digital_answering_systems/tad2018.pdf

Hope it helps

Hello,
Read the following


To erase messages

Hello,
When you are away, you call your number. After the answering machine asks you to leave a message, punch your code and listen to the instructions (hear new messages, hear all messages, erase message, de/activate answering function, etc.).

Hope it helps.

Check this link and select the product:

http://personalcare.owneriq.net/manuals/mfg/conair/conair_product_list.html

Have a good one!

Insert a new 9 Volt battery (machine will work without a battery if you want to ignore the blinking light)

my sigmatel s90 is not switch on plz slow this


plzzzzzzzzzzzzz