20 Most Recent Conairphone CID 244 Questions & Answers

take anotehr phone that you know that is working and plug it into the same wall Telephone plug. If you get dial tone it means your original phone is faulty. If not.. then you must contact your service provider to send out a tecnician to check your line from the local exchange. In south Africa you should get 52Volt dc on your line ..

Conairphone CID... • Answered on May 30, 2014

I just uploaded the manual for Conair pr6202 at http://phone.manualsonline.com/ex/thread/view/idThread/2372352

Conairphone CID... • Answered on Jul 07, 2011


You will need to erase the old one, before you can enter the new one.

Take care.

Conairphone CID... • Answered on Oct 09, 2010


You should use the manual as a guide. If you do not have the manual,

download the manual from ConairPhone.com. or

Call the Conairphone™ Consumer Hotline, toll-free, 1-800-366-0937.
Hotline Hours: Monday-Friday 8:30 a.m. - 9:00 p.m. (EST)
Saturday 8:30 a.m. - 12:30 p.m. (EST)
7475 North Glen Harbor Blvd.
Glendale, AZ 85307


Conairphone CID... • Answered on Aug 10, 2010

I picked up a cid 244w phone at goodwill because it will work with the power out. With a lot of fiddling around I found that if you push the erase button and hold it, then push the review arrow down button the menu starts. It starts with Contrast then to language, area code, date and time, and lastly tone or pulse.Set it to tone,Pulse is the old rotary dial phones. You scroll through the menu by pushing the erase button and change things with the review up and down buttons. If you wait too long to change something the menu automatically advances. If the item you want to change passes by just start over. Good luck, I hope this helps

Conairphone CID... • Answered on Sep 06, 2008

There are four double A batteries in the bottom you have to install (or change). After your first incoming call, the time and date will be set automatically and the caller ID should start working.

Conairphone CID... • Answered on May 15, 2008

Call conairphone, they will tell you over the phone how to sotre numbers. You can find their number by doing an online search. If you have an old model phone follow these steps. You have to make sure your batteries are working. Leave phone in cradle - press and release store button - dial the number - press and release store button again - press the button you want your number stored.

Conairphone CID... • Answered on Feb 23, 2008

I could not find the exact manual for your phone, but this one looks close and has instructions for programming the memory: http://www.conairphone.com/IBs/caller_id/cid200.pdf It says: BASIC MEMORY PROGRAMMING The CID200 comes with 10-memory dialing. NOTE: Your local phone company restricts the time you can have the handset off the base (off-hook). YOU SHOULD PROGRAM THE CID200 MEMORY WITH THE LINE CORD UNPLUGGED FROM THE WALL, IF YOU ARE GOING TO PROGRAM MORE THAN ONE PHONE NUMBER. Press [STORE] to enter memory store. Press the keypad to enter the number that you want to program. Press [STORE]. The ?MEM? will be displayed on the right corner of LCD. Press the memory location (0 to 9) on the keypad. The LCD will then return to the ?Answer-Ready? mode, and display the total call counter, new call counter, current time and date. Copy from the Caller ID to Telephone Memory Press [Up Arrow] or [Down Arrow] until the Caller ID memory location to be copied appears on the LCD. Press [STORE] twice to enter memory store. The ?MEM? will be displayed on the right corner. Press the memory location (0 to 9) on the keypad. The LCD will then return to the ?Answer-Ready? mode, and display the total call counter, new call counter, current time and date. If no key is pressed within 20 seconds, the LCD will return to ?Answer-Ready? mode. Repeat the above steps to store a different number in the same speed dial location, or to store a new number in a different speed dial location. NOTES: ? Pressing [PAUSE] will place a 4-second PAUSE into the number. Which may be required for accessing special phone services. ? You can store a number with up to 16 digits maximum. Only the last 14 digits will be displayed.

Conairphone CID... • Answered on Mar 15, 2007

Try taking out the batteries for few minutes and then put them back. Sometimes this is the problem. Daniel

Conairphone CID... • Answered on Feb 02, 2006

Not finding what you are looking for?
Conairphone CID 244 Logo

Popular Tags

30 questions posted

Ask a Question

Usually answered in minutes!

Top Conair Lands Phones Experts


Level 3 Expert

8092 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

Tom Chichester

Level 3 Expert

61936 Answers

Are you a Conair Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Conair Lands Phones

  • Conair Lands Phones

Most Popular Question

set time date

  • Lands Phones