20 Most Recent Conair TAD 2014 Answering Machine Questions & Answers

0helpful
1answer

I need to set the

Hello,
Here is the link to the manual

http://www.conairphone.com/IBs/digital_answering_systems/tad2018.pdf

Download it and save it.

Hope it helps
9/16/2009 5:43:52 AM • Conair TAD 2014... • Answered on Sep 16, 2009
0helpful
1answer

Remote operation

Hello,
Here it is.

34d1a46.jpg

To erase messages.
7514123.jpg
9/16/2009 5:40:57 AM • Conair TAD 2014... • Answered on Sep 16, 2009
0helpful
1answer

Can't program the greeting conair tad 2014

Hello,
Here is a link to the manual.
http://www.conairphone.com/IBs/digital_answering_systems/tad2018.pdf

Hope it helps
9/16/2009 5:37:27 AM • Conair TAD 2014... • Answered on Sep 16, 2009
0helpful
2answers

Conair digital answering system

TAD2012 Quick Reference Guide


To Install
1. Open the battery door with a ballpoint pen. Install one 9-volt alkaline battery (not included)
and replace cover.
2. Plug the telephone line cord (connected to the back of the TAD2012) into the modular wall
jack.
3. Plug AC adapter into standard 120-volt outlet. Plug your phone directly into an outlet, not into
an extension cord.

Answering System Operation

Recording Your Personal Greeting
1. Press and hold down the GREETING control.
2. After the beep, speak towards the front of the base; you have 30 seconds.
3. When finished, release button. Your unit will play back your greeting and
reset to answer incoming calls.
4. Adjust volume control on the side of the unit to set the speaker to the desired level.

Select the Number of Rings
Choose 2,4 or TS (Toll Saver), which programs the number of rings that you want before your unit answers.

To Play Back Your Messages
1. When the message indicator flashes, you have received messages.
2. To hear your messages, press and release the PLAY control. Your unit will automatically
reset after messages are played.

To Save Your Messages
After the last message and 2 beep tones, press the STOP/SAVE control.

IN CASE OF POWER FAILURE OR IF ANSWERING SYSTEM IS NOT OPERATING PROPERLY

If a power failure occurs or the plug comes out of the wall, your unit will shut down until the power is restored. One 9-volt battery must be installed to retain your personal greeting message and incoming messages during the power failure. Occasionally outside factors, such as power surges, may adversely affect the unit. If the unit is not operating properly or if the light continues to flash once power is restored, try these steps:
1. Unplug the AC adapter from the power outlet.
2. Remove the 9-volt battery. Replace with a fresh 9-volt battery.
3. Plug AC adapter back into power outlet.
4. When your unit is initially plugged in, it will check its memory for approximately 3 seconds.
Three deep tones will be heard if you attempt to record a greeting message before this
period.
5. Record a new greeting message.

Indicator Status: Message indicator is consistently flashing slowly.
Reason: No greeting message has been recorded.
Action: Record your greeting.

Indicator Status: Message indicator flashes rapidly.
Reason: A 9-volt alkaline battery (not included) has not been installed or needs to be replaced.
Action: Install a fresh 9-volt alkaline battery. (Battery provides power failure backup. Unit is functional without it).

Indicator Status: Message indicator flashes to indicate number of messages received,
and then repeats.
Reason: Messages have been received.
Action: Press PLAY control to hear your messages.

Indicator Status: Message indicator is lit solid.
Reason: System is in Answer Mode.
Action: No action required. Unit is ready to receive calls.


Conairphone™ Consumer Hotline

Questions? Call the Conairphone™ Consumer Hotline, toll-free, 1-800-366-0937.
Hotline Hours: Monday-Friday 8:30 a.m. - 9:00 p.m. (EST)
Saturday 8:30 a.m. - 12:30 p.m. (EST)
7475 North Glen Harbor Blvd.
Glendale, AZ 85307
4/7/2009 1:46:51 AM • Conair TAD 2014... • Answered on Apr 07, 2009
0helpful
1answer

Conair TAD 2014 Answering... Problem

The time associated with messages is incorrect. How can I change it?
10/14/2008 10:25:00 PM • Conair TAD 2014... • Answered on Oct 14, 2008
0helpful
1answer

Power adapter

As long as you dont EXCEED the power rating listed on the answering machine itself, you can use/purchase a new power adapter for it.

You should be able to find a power adapter that matches the answering machines power need exactly.

I hope this has helped to solve your problem, good luck!
5/16/2008 6:35:38 AM • Conair TAD 2014... • Answered on May 16, 2008
0helpful
1answer

Bought system at yard sale but no manual

Here's the link for Conair; http://www.conairphone.com/Pages/IBs.html They have a manual for the 2012 which may be useful; http://www.conairphone.com/IBs/digital_answering_systems/tad2012.pdf else contact them on; 1-800-366-0937. Sorry doesn't seem to be available online anywhere else. Hope this helps :)
8/21/2007 2:44:41 AM • Conair TAD 2014... • Answered on Aug 21, 2007
0answers
0helpful
1answer

What does the t-p button on my conair phone do model sw2502 older phone

The button switches from tone dialing to the old pulse number dialing.
2/5/2015 3:07:49 AM • Conair Lands... • Answered on Feb 05, 2015
0helpful
1answer

I need manual for conair 10 memory speaker phone

http://www.manualslib.com/manual/224019/Conairphone-Cid200.html
if this isn't it, just Google "manual for (insert model number)"
1/21/2015 7:00:22 PM • Conair Lands... • Answered on Jan 21, 2015
0answers
0answers
Not finding what you are looking for?
Conair TAD 2014 Answering Machine Logo

Popular Tags

17 questions posted

Ask a Question

Usually answered in minutes!

Top Conair Lands Phones Experts

k24674

Level 3 Expert

8092 Answers

Oloyede Monsuru

Level 3 Expert

1468 Answers

Tom Chichester

Level 3 Expert

62184 Answers

Are you a Conair Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Conair Lands Phones

  • Conair Lands Phones

Most Popular Question

conair digital answering system

  • Lands Phones
Loading...