Conair Lands Phones - Answered Questions & Fixed Issues

The button switches from tone dialing to the old pulse number dialing.

http://www.manualslib.com/manual/224019/Conairphone-Cid200.html
if this isn't it, just Google "manual for (insert model number)"

take anotehr phone that you know that is working and plug it into the same wall Telephone plug. If you get dial tone it means your original phone is faulty. If not.. then you must contact your service provider to send out a tecnician to check your line from the local exchange. In south Africa you should get 52Volt dc on your line ..

You can download a copy of the user's manual here: http://www.conairphone.com/IBs/digital_answering_systems/tad1212.pdf

connect the phone line from the wall to the machine, then connect a second line from the machine to your phone, plug the machine power in and you should be good to go

Is there a switch to select pulse or tone dialling? If so try it in both positions.

Go to support on their website and download an owners manual. murf427

I just found my old manual and went online to see if anyone needed one. Do you want me to scan this and email you the manual?Let me know at mailit2tina at gmail dot com

well i have the infiniti 2500 and you did not indicate how to do a reset.there is a way and the phone number 800-366-0937 is busy all day and nite.

you can contact the service provider....

I just uploaded the manual for Conair pr6202 at http://phone.manualsonline.com/ex/thread/view/idThread/2372352
7-6-11

Thank you for writing in regard to your concern about asking for the dimension of the phone Conair SW1204 2Line Corded Phone. Let me help you with this.
Here it goes:
Base Dimensions. Width, 3.8 in. Unknown. Depth, 8.9 in. Unknown. Height, 3.4 in.

i was wondering the same thing. i contacted conair, and although they no longer make these things, a very nice lady named maria was able to find an owners manual which she promptly sent me via email. the L means the 4 triple A batteries need to be replaced. hope this helps.

You don't need to erase the messages. Once you have listened to them, the next time a message is left on your machine, it will erase the older one.

I have this answering machine...

To set the day and time press the "REPEAT" button and hold it in. It will say something like "Time not set." and if you keep holding it it will say, "Monday." Now release the "REPEAT" button and use the "ON/OFF" button to cycle through the days. When it says the correct day, press and releasethe "REPEAT" button. Then it will go on to set the clock and you're done.

To adjust the rings, there is a slide switch on the top where the cords plug in. You can switch it to 2, 4 or TS (Toll Saver). Toll Saver generally lets it ring for about 5 rings before answering.

Hi friend, I'm really sorry for your problem.. But it could be easily fixed. Don't worry.
>> Your problem may be due to the malfunction of any hardware parts in the device..
>> if your device was still in warranty period its easy to fix. Just give the device to the nearest conair service center along with your warranty details or bill. >> If not, It's better calling the toll free customer service number of your device manufacturer that will be in your manual.
>> If nothing works, then the best way to seek professional help. Get it to the nearest service center to make the device work for you.. All the best.. don't forget to vote me..
Good luck. :)

This can be a shorting in the input line of the telephone which makes the input voltage of about 50 Volt DC drain into the switching device.
So trace the voltage drain into the circuit to confirm.

To delete messages from your answering machine, you need to play the message or view the message, then you select erase when you finish listening to the message. That should do the job for you.

To store numbers into the phone's memory:

Lift receiver - you should hear dial tone. Then, press 'STORE', press key M1, M2 or M3.* Enter the number you wish to store. Then, press the 'STORE' key again. Now, press the memory position you chose above, (M1, M2 or M3).** Replace receiver back on cradle.

To use - lift receiver and press the memory key that was optioned, (M1, M2 or M3). If a numeric key, (1-9), was chosen - press the 'MEMORY'' key then the chosen number.

* To store in numeric 1 - 9, just press the 'MEMORY' key for this step.
** When storing in numeric 1-9, Press the 'MEMORY' key and then the number you wish to store in this step.

Tip: For a phone card, use M1 for the 800 number and M2 for the PIN.

hello,

TWO WAYS SOLUTIONS

The mailbox Service is a service provided by the Cox Corp. that allows you to store and check voicemail messages on your home landline phone.

Of course, because the size of the voicemail inbox is not unlimited, you will eventually need to delete some of your stored messages to make way for new ones. Fortunately, this process is not overly difficult, and you can accomplish it with a simple phone call.
Difficulty: Moderately Easy Instructions

1. 1 Dial your home phone number from your home land-line. This will bring you to the main menu of the Cox voicemail system.
   
2. 2 Press the "*" key on your phone, and input your password when prompted by the computerized voice.
   
3. 3 Press "1" to begin a playback of all your stored messages.
   
4. 4 Press "7" to delete each message in turn. Continue to press "7" at each message until all the messages in your voicemail inbox are deleted.
   

SOLUTION 2

HERE ARE HOW TO DELETE ALL THE MESSAGE AT ONCE FROM THE BOX BELOW

Depending on your settings for how long to store messages on your BOX Curve and how many messages you get a day, your mailbox can get full fast. Deleting all of those messages one at a time can get time consuming, but there is a way to delete all of your messages at once.
Difficulty: Easy Instructions

1. 1 Scroll to the "Messages" icon using your trackball.
   
2. 2 Push down on your trackball.
   
3. 3 Click on the menu button that is to the left of your trackball.
   
4. 4 Select "Delete Prior."
   
5. 5 Choose "Delete" when asked whether you want to delete all prior saved items.
   
6. 6 Confirm that the words "No Messages" appear in your messages folder.
   

Thank you andd thanks for using fixya.