Alessi Coffee Makers & Espresso Machines - Recent Questions, Troubleshooting & Support

The right sized spring-clamp could keep the tube connected.. a wire around the tube pulled tightly to one of the blue motor mounts might also keep it from pulling loose.

Probably! I'd check eBay or Amazon. I know refillable capsules are available for Keith, not sure for Nespresso.

Don't you love the sound of the Sapper Kettle? Alessi refers to these as the E & B Pitch Pipes. Over time, impurities in the tap water corrode the internal reed whistle, and always the low pitched one first. Here's a tip: Once replaced, avoid overfilling the kettle to the top, causing boiling and water to spill though the pipes. The water might contain impurities, but the steam doesn't. This should help keep the pipes in working order for many years. We've had our Sapper kettle for 30 years. I have found the best way to remove the old whistles is with the thick end of a Chop Stick. The soft wood worn't scratch the metal. Insert chopstick from the bottom and tap to drive them up and out from the top. I get my replacement Pitch Pipes at the San Francisco Alessi store: Part 12701. Cost: approximately $16. (415) 434-0403 [email protected] Hope this helps. Jonathan

you need to replace it with a new one it will be corroded. heat kettle then drive out pitch pipe with a screw driver from below, insert new one from above.

Contact Alessi by phone or online/email: https://www.alessi.com/us_en/contacts https://www.alessi.com/us_en/contacts

Sorry we have no way to look that kind of info up here.

replace batery