Pro 99 My PRO 99 has a blue wave going across the whole screen. I thought maybe convergence ICs? Any suggestions? [email protected] Sounds like convergence outputs. Possibly some biasing resistors
Question about SD-643HD5 64" Rear Projection Television
across in the lower 1/3 of the screen. Every object or text that are white will be yellowish and a shadow in blue will project about a feet above. Only in the lower part of the screen. The rest of the
color line half way across the bottom of the screen? Any suggestions or solutions? this is the convergence gone bad. that is what was blowing the fuse. this is the board on the far left. there are two
...across the screen. The arcs are red and green. Is this problem easily serviced? Can a DIY handle this or do I need a service tech to come out? Any estimate on parts and service costs? Is the problem ...
Question about PDP-425CMX 42 in. Plasma Television
...across the screen and is now almost to the left side. It looks as though the line to the right side may be getting thicker and darker. It could be a defective Y-Buffer board, or a defective Plasma ...
Question about SD-532HD5 53" Rear Projection Television
...color separation and overlap Our TV has a serious ghosting problem. We have tried to reset all original settings, but it has not fixed the problem. It looks like the colors overlap, and go across the ...
Question about PDP-42A3HD 42 in. Plasma Television
Color vertical lines across the display I have a picture on the screen just with the lines & flickering it's anoying. Any insights would be gladly appreciated. Thanx I have the same problem... how
Question about PDP-42A3HD 42 in. Plasma Television
...across the screen and the color changes. Someone said they have a gel pack(?) that might need replacing. ya i got the same tv and i see double picture on the bottom of th tv if i cover the blue light ...
Question about SD-643HD5 64" Rear Projection Television
...across the screen and color is yellowish on SD-643HD5 when color does come back on there is a blue shadow around certain boxs or texts It sounds like a convergence problem---a lot of shops will not ...
Question about SD-533HD5 53" Rear Projection HDTV
when i turn on tv there is a wave on bottom of screen Its proably time to replace the Convergence ICs, if they have never been replaced also look for poor solder connections on boards.
Usually answered in minutes!
154 Questions
129 Questions
91 Questions
84 Questions
61 Questions