Questions & Answers for: Electrolux how do i get to the water valve

...water valve screen and blocks it up also.if your getting water then its trying to do its job,it just cant get enough water and the timer times out so no more voltage to the water valve.thats a lot ...

water valve opening - if no click, you should check the water fill valve. Remove the lower front cover and find the valve with a water line connected to it. It should be about 3/8" flex or copper line

water main valve is turned to off.First check that.If its turned to on, then its not that case.The water passing line / tube is blocked or unplugged from the valve.First see, if its properly connected

part number=> 241734301 Tripple Water Inlet Valve If you have any questions once I post this solution I will be here to answer more if needed, Thanks Sea Breeze If helpful please rate this solution

...them with a nail brush.If that is all clear and you have water pressure to your water valves you will need to change the water valve??The water valves will normally hum when the water is turned

...water valve on the back of the unit, remove the green wiring connector from the green valve(green is the im valve). Leave it loose and take the dispenser wire(yellow) from the yellow valve and place ...

where 2 wires go to each water valve & check that area on valves for burning. If burnt or smells of burning, replace valve. IN SOME INSTANCES A COMPONENT BURN OUT CAN CAUSE DAMAGE TO CONTROL BOARD

...water valve on dish washer part 154513601,remove the bottom panel you'll see the valve on left side,you can crack the fill line with a wrench and see if any water comes out,if the valve is humming ...

...valve: The water inlet valve is responsible for controlling the flow of water into the ice maker. If it's faulty, it may not be opening to allow water to enter the ice maker. You can check the valve ...

...water inlet valve is leaking and letting water in past a faulty seal. The valve just needs replacing with a new one. They are not serviceable. ...