Questions & Answers for: turntable too slow

my numark tt1625 turntables keep slowing down If you could be a little more specific, we might be able to help you out better. Does it slow down, when you do anything, or after a long period of time ...

turntable will not hold pitch,speeds up or slows down. Gemini XL 500II turntable will not hold pitch,it either speeds up or slows down making it very hard to mix.Can this be fixed? try replacing the ...

...turntable turns very slow when set at 33 r.p.m. and 45 r.p.m.. 78 r.p.m. is okay and will slow down if adjusted the motor needs cleaning,along with the inner shaft on the spindle and a new table belt ...

turntable runs too slow I have a Technics SL-B205 turntable that runs too slow - even with pitch control all the way up. I have replaced the belt. Motor seems to run smoothly/quietly, What else to do?

...turntable? Is there anyway I can fi Plays 33 1/3 LPs slow. If the 45's play OK then your belt might not be fitted in the right place. If they are both slow, then either the belt is slack or the drive ...

...slow I've had this turntable for about six years. I've recently replaced both the belt and the stylus, but records still sound distorted. Specifically, tempos too slow, vocals too deep, etc. Can tell ...

...slow? My turntable spins, but the speed is too slow to play an album. I haven't used turntable in one year, but it was working perfectly before. If it's belt drive, the rubber drive belt may be ...

Installed Turntable Belt to Slow it Down TRY stretching the belt a bit. Check to see if your tt has a speed control. A stretched out belt will slip and cause the turntable to rotate slower than normal

...slow? turntable runs a little slow on both 33 & 45 rpm pitch control at maximum It depends which type of turntable it is. If a belt one then change the belt, make certain you make a note of how the ...

...turntable DJQ-1500 that is spinning extremely slow and is laggy when manually adjusting the record Clean Your Turntable with a microfibre cloth. Power off the turntable and unplug it for safety. ...