Questions & Answers for: turn signal wiring

...turn signal noise) when I turn right, the drivers side front and rear just stay lit when I turn left with no noise. I have checked he fuses and replaced any burnt out bulbs with no luck. Has anyone ...

...turn signal that has 3 wires. The two wire system is for a turn signal only unit. The three wire unit has a turn signal and a running light in it. Remove the turn signal lense and you'll probably see ...

...turn signal Broken left front turn signal. Both the lens and post are broken. Have removed face plate under head lamp and have loosened nut attaching turn signal to heavier black electric wire coming ...

...turn signal cancelling unit. There is a wiring sub-harness that take the turn signal wires to the rear turn signals. There should be two grey wires with a brown ring on one wire and a violet ring on ...

...turn signal's metal bulb socket base. Then find out which wire is the running light and which is the turn signal by hooking the ground wire and one of the other wires to a 12 volt power source. Which ...

Turn signal wiring color does not match wiring schematic? Honda uses Green for ground, and orange and light blue for turn signals. A white tracer on the front turn signal wire is for the running light

turn signal on my 2001 Sportster. The signal that is on it now has a blue and a black wire. The new one only has a black wire. How do I make this work? Before you take anything off or hook anything up

turn signal. whichi fuse? only when right turn signal. not left. ? Fixya This is the problem with short in wires, the wires from turn signal switch to turn signal bulbs needs to be inspected, there is

...turn signal switch, and coordinated there with the turn signal wires to the rear brake lights. The brake wires and turn signal wires share the same wire, and same filament in the bulbs. It is kind of ...

turn signal. With everything turned on, is there voltage on that wire? Because the front works and the rear don't, possible wiring circuit problem? The voltage for turn signals comes from bcm. The bcm