...lift the tonearm and see how far it goes inward until you feel resistance. Maybe the weight need to be adjusted. Is the turntable on a flat surface? Is there anything obstructing the path of the ...
...lift. Tonearm lift is probably a deteriorated belt. Google it, it's pretty common. The platter spinning might be due to a bad control board. You'll probably have to go to a repair shop to diagnose
...tonearm lift control handle moves up and down fine, but tonearm remains in up position. Is it possible to fix so tonearm will lower to play the record? thanks, Steve I have also had this problem with ...
...tonearm! can this be adjusted easily? feel like i'm overlooking something, but I haven't changed the balance of the arm or anything, and eyeballing the deck next to it I can see how it's supposed to ...
arm will not travel all the way across record before it lifts Tonearm wiring is tangled under tonearm. Cheers john, Stylus City. In the solution above, I'm afraid to say, there are no electronic ...
Question about TD295-MKIVB Turntable
...tonearm lift further along. Fine tune antil sorted. If the adjustment is not at tonearm base remove the rubber platter mat. If the platter has an access hole in it rotate platter so the hole is near ...
Question about RP1 Turntable
...tonearm lift / lower platform has a 1.25mm hex socket, if my memory is still working. Some cheap allen key sets are around with a bunch of the tiny keys included..check the Pound Shop.After you undo ...
...lift the cue lever and place the tonearm where I want it to land on the record, but when I lower the cue lever the tonearm moves pretty drastically away from the position I put it in. For example, if ...
...tonearm, does not start the platter turning, That lever is simple a lift to cue up or down. He is also correct, when he says that the platter begins to turn at a predesignated position above the run ...
tonearm doesn't automatically return technics sl-d 202 The tone arm doesn't return automatically when the record is done. The button works fine, but it would be nice to not have to use it.
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions