Questions & Answers for: timing marks tracker

1992 Geo tracker Can anybody help me with the timing marks on a 1992 tracker i presume cam here http://carfix.stufftoread.com/ see tbelt line why does my tracker only go 25 and when is stop it dies

...changed the timing belt and needs to know how to set the timing marks and which way the pully needs to go to set them ty Point the pulleys to there timing marks and point the dist. to #3

timing marks for a 1.6 litre engine 1996 Geo Truck Tracker 2WD 1.6L MFI SOHC 4cyl Fig.: Before installing the timing belt, position the camshaft sprocket (1) so that the timing mark on the sprocket (2

my 91 geo tracker has jumped time .how can i get it back in time? remove Timing Belt covers set Top Dead center cyl one align cam mark and set tension

timing belt replacement camshaft timing mark at 12 o"clock, align cam shaft timing mark to ( v ) cut on top of back timing cover, crank shaft gear align 12 o'clock key way up, there will be a mark on ...

...http://www.2carpros.com/car_repair_information/year/1997/make/geo/model/tracker/1997_geo_tracker_timing_belt_diagram_marks.htm email me at [email protected] and I'll get them right out to

...am trying To Find where my timing marks should be ( belt broke ) most of the time there will be one mark on the crank pulley gear and the one on the cam pulley gear.usually a dot or a straight

...Timing + Marks: Belt Diagrams, including for your 1995 Geo Tacker, 1.6L SOHC 4-Cylinder. Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at ...

...timing/index.html see , its all there, and even the factory pages are linked that tool cam marks #4 firing. distributor marks are #1 firing, on all 3 engine, early 90s classes. the cam cog wheel on ...

...at tdc crank almost lined up Hi Ryan , the timing gear marks will possible not mark hundred percent when timing chain is worn much . the tensioner should be inside when you check the valve timing