Questions & Answers for: thread old janome sewing machine

thread my Janome I have bought an old Janome to learn to sew on and I don't even think I have thread it up right. hi! there, how to threade your janome well, just click this to internet on youtube you

thread is not old. then adjust you bobbin tension...there are 2 tensions on machine top and bobbin Your top tension may be too tight or it could be incorrectly threaded. Check threading and ensure you

...thread to the old one and pull it through so you don't have to start again. You can even sew slowly and ease the know through the guides. overlockers are fussy about start position of tail of thread, ...

...old. When stitching, the thread from the bobbin is a straight line and the thread from the needle is perfect. How do I adjust or fix the way the bobbin thread is stitching? Unthread the machine. Set ...

...thread as old thread breaks easily Also, install a brand new needle that is compatible with the thread and fabric you are using. Old needles become dull, bent, or damaged that affect the way the ...

...correctly. Be sure to use good quality thread--no Old or bargain bin threads! Solve Most Sewing Machine Problems With These Simple Tips Why Does My Sewing Machine Keep Jamming Sewing Made ...

...old or bargain bin thread!

Remove all the thread from the machine.
Make sure you are using a brand new needle.
ALWAYS RAISE the presser foot and rethread from the beginning.
Set ...

old thread? Is the needle threaded correctly, is the thread the same in the bobbin as the top. Are the thread and needle the correct size for the material? Is the stitch length and tension correct for

...thread is not too old and that the same thread is in the bobbin and the thread on top. :-) https://www.janome.com/siteassets/support/manuals/retired/other-models/415.pdf Possibly debris in hook race. ...

...old. used it heaps. no major problems before. Thanks. It sounds like you might have a piece of thread in the bobbin case. Locate and remove the thread. Hopefully that will make it so the machine no ...