Questions & Answers for: static routes

...with other static routes.The provider of that IP blames my equipment. I use H323 could be bad rought u unplug it fr wiel and cool it down plug back in is it getting hot do u have fans on your ...

Static routing "Advanced Routing" on Linksys WRT55AG I use a Smoothwall Firewall/Router to create a private 192.168.2.x (255.255.255.0) network. On this network I have networked printers with static ...

how to configure static route between 2 LANs? Hi, How to configure static route between 2 LANs? I have LAN1 with IP 192.168.10.0 and LAN2 with 10.200.14.0 I need static route to LAN2 with gateway on ...

...static routes appearing in route table automatically receiving incorrect static routes that are being automatically generated in a draytek 2910g. It is in ppoe mode behind a modem set to ppoe with ...

...static WAN IP routes on my DGL-4100 to LAN-side servers and it doesn't seem to be working. The DLINK manual is unclear. Is there anyone that has a typical block of 5 IP addresses from their ISP that ...

static routes witht he SRW2048. Unfortunately, the manual gives no clue about how to configure them. How do I configure static routes on a SRW2048? i don't see it i looked at the owners manual and see

...routes except between 10.20.30.0 and 10.20.40.0 subnet. Static routing should be set on two computers not on routers. Assume computer A is connected to 10.20.30.252 Router A and Computer B is ...

Does the Configuration of an Active Static Route Still Exist When the Outbound Interface Status of the Static Route Goes Down? If the outbound interface state of a static route goes Down, the static ...

...static routes, and setting the preference of static routes Security management Port isolation, static user binding, AAA, 802.1x authentication, and MAC address authentication Tools Ping, Tracert, and ...

...support blackhole routes.The S5300 V100R005, and S5300 V100R006 and later versions support blackhole routes. The following command configures a blackhole route: ip route-static ip-address mask NULL ...