Questions & Answers for: sebring wont gear

wont start and have been told it is the starter, where is the starter located? It is a 2004 chrysler sebring convertable! The starter is mounetd to the bottom of the engine either left or right of the

sebring wont get out of park starts fine but will not go into gear. has been sitting for 7 days Newer cars REQUIRE you to press on the brake to get into gear. If the switch at the brake pedal is not ...

...sebring v6 that wont start the lights work the bettery is good i started it up to move with no problems 5 mins later it wouldn't start i tryed to give it a jump and all the car is acting like its in ...

...sebring conv, wont shift into gear, i pressed the release button at the cup holder location and nothing, if was running fine and and next day just wont go y woulthink is probably oyu input or output ...

...timing chain and a cam gear every thing is right the timing marks the gear eberything but car wont start 2005 2.7 sebring remove and retime your distributor, sounds like it's 180 degrees out of

...sebring wont go into gear from the inside of the car, it want go out of park. But I can go under the hood of my car and get it into gear. I was wonder what the problem could be and how much need help ...

...? it wont change gears automatically The button to turn overdrive off is usually on the side of the gear shift lever, but that would not make any difference on shifting from low to second and

...01chrysler sebring wont shift. the button wont push in Check the function of your brake light switch. If that works and the brake lights illuminate then check the operation of the gear shift

sebring wont shift into any gears Check that the shift linkage is connected at the trans, if it is, put some transmission fluid in it after checking the dipstick while running in neutral with brake on

...sebring convertible wont shift past 2nd gear...wiring harness?? have replaced tcm, brain is good, fluid is good...still wont shift?? Spouse says it threw 3? codes...600? 700? Help? you need to go see ...