Questions & Answers for: Dell Inspiron sata bios

...BIOS menu and see whether a) SATA 0 - ST325082045 3.ADG b) SATA 1 HL-DT-STDVD +-RW GSA H31 are just visbile(in sense, you can see them in BIOS writen ), this will make sure system is able to detect ...

...BIOS uses a SATA controller that is not included in Windows XP install disk. Usually you can solve the problem going to BIOS settings and changing SATA/RAID settings.Check your BIOS settings, and ...

only two of the four SATA channels are active on my Dell Inspiron 531 desktop Check the BIOS configuration to see if all the SATA channels are enabled.

sata cables on the main board are plugged in correctly the hard drive should be in sata port 0 and on some dells it's sata port 1. Make sure in the bios that the Sata HDD 0 is enabled. Hope this helps

...SATA in the BIOS. Thank you very very much. Just boot from XP CD - pressing F12 should give you the option in Bios, allowing you to boot from CD when all is completed. Some PCs still need sata/scsi ...

Bios settings or something else did ....Than I think the lack of sata raid driver makes the reading of your hard disk impossible ..To fix this ..either try to reinstall the operation system and during

...install XP normally. When Windows has been installed then install all the device drivers (including the SATA driver), then shut down and boot up and got into the BIOS and enable the SATA

...1: installed SATA 2; none SATA : none Computer is not configured to boot from your hard disk drive (SATA 0), you need to go into the BIOS (set-up) menu and make that drive the fisrt boot

...boot saying SATA 0 installed SATA 1 installed SATA 2 none SATA 3 none Johnathan,have you changed anything in BIOS.set optimal defaults ? if BIOS can change BOOTDRIVE.windows are in one of the

...bios sata I`m having a problem trying to boot a dell mini 9 Notebook. I saw a person on a forum who was having the same problem and here`s what he did to fix it....The Recovery Console (RC) does not ...