Questions & Answers for: roper washer clothes wet

...wet I have only had this washer a month. The clothes are still too wet when the cycle is done. It is not spinning them enough. What do I do? the belt is bit losse, try to tighten it a bit and try ...

...washer spin cycle doesn't leave clothes dry I have a kenmore top loading washer that is about 10 years old. I find that many times, but not all times, the spin cycle is leaving the clothes somewhat ...

washer will spin but clothes are still very wet if you put heavy clothes such as towels and jeans they are very wet and take forever 2 dry CHECK YOUR WASHER DRAIN PROTECTOR. GO TO www.repairclinic.com

...clothes at the bottom are still dripping wet and I do not overfill the washer, and its on all cycles Your drain pump is not draining properly. Remove from washer and inspect the pump section. Check ...

Clothes are not completely rinsed (they're soaking wet) at very end of spin cycle. Try to fill minimum water level in your machine with out adding detergent or clothes and complete cycle and see if it

...Roper washer will not spin on the spin cycle. my roper washer operates fine throughout the whole wash cycle but when it reaches the spin cycle it will not spin.Help.My clothes are soaking wet. IF ITS ...

...and run a spin cycle again,if the clothes are still wet, you may have a worn or loose belt which you have to replace. Thanks how to fix the motor coupler how do I remove my roper washer ...

...washer spin out more water. After spinning cycle clothes is quite wet. Could it be a loose belt? Their is no belt. The washer uses a double shafted motor which drives the pump on one end and the ...

no spin cycle - cloths soaking wet - motor runs continuously - hot burn smell if the washer drains the drive cuppler it bad let me know if draing can walk you threw how to replace

why does the spin cycle at the end leave the clothes too wet to put them in the dryer re-washing the clothes You may be overloading the washer.