...dvd player, but after trying the radio and ipod bridge through it we still could still receive no sound at all. Has this happened to anyone else and how was it fixed? We are worried it will cost more ...
reset it.) Synopsis: Add a 4.7K ohm resistor to the indicated area on the bottom of the Main PCB. CAUTION: The DVD22 is an electrostatically sensitive unit and can be damaged by careless handling; you
...dvd for about 5 mins and could hear the sound. Keep in mind I have not connected my projector yet. Then I connected the projector and there starts the problem again. So I guessed there was some ...
...dvd player refuses to open. the machine does not even make a noise like it wants to open...thoughts? you probably did this already,but unplug the player,and reset,hopefully you can return it,or its ...
...any sound for a movie or a cd. The display selection will allow me to switch to opt1 and then it resets to analog after a few seconds. I've tried resetting twice with no luck on getting the OSD or ...
...dvd player connected with digital coax, when the power goes out it will revert to the factory default of analog. The receiver will be looking for an analog RCA connection input from the DVD not ...
...DVD player using different methods mentioned in the manual. I have been unsuccessful establishing a connection using HDMI cables (1.4), optic cable and component cable. I have tried connected the AVR ...
...DVD player is turned on and that the cables are connected securely to both the player and the receiver. Check the cables: Ensure that the cables you are using to connect your devices to the AVR25II ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions