Questions & Answers for: Mazda replace a plug

Replace Coil Pack on 2008 Mazda MPV I replaced the spark plugs and it looks like #2 plug was not firing, I was hoping that the new plugs would fix it but it didn't. I am going to try to replace the ...

Replace spark plugs on a 2008 4 cylinder tribute This is a fairly easy job. Do each cylinder one by one (removal and install), make sure to reinstall the coil on the same exact cylinder (DO NOT MIX UP

tend to leak oil into the area of the spark plug holes. You will have to replace the plug wires also. Just replace them one at a time so you will not losthe firing order.Hope this helps. Leave comment

...procedure for the remaining two plugs on the front and the three plugs on the back of the engine. Remove and replace one plug at a time, to ensure that you don't mix up the wires. Best

...plug. I recommend replacing all the coils, and also replace the plugs while you're in there. Use OEM plugs; probably Motorcraft. (If the original plugs lasted 100,000+ miles, why would you ...

...you have 1 bad spark plug you should replace them all same thing goes with the plug wire you can have the coil tested at the parts store i would replace the spark plugs and wires then go from

...replace the spark plug wires.How was it you tested the coil and spark at the plugs?I'd lean more towads faulty fuel injection, if you go to repai this, please be sure to add a quality fuel tank ...

...plug replace the correct spark plug wire. then move on to the next spark plug and follow the same instructions. if you have any other visiable obstructions preventing you access for replacing your ...

...plug is accessible, replace the bad one and move on. If it is not accessible and you need to remove the engine to provide service, then you are best suited to replace ALL freeze plugs since you ...

...plug. Do I replace both coils A loose electrical connection is a major cause of heat, so maybe it wasn't pushed onto the plug securely. And no, you do not need to replace both coils. It will be fine, ...