20 Most Recent 2004 Mazda 6 Questions & Answers

0helpful

1answer

Firing order for 2004 mazda 6 2.3l

https://www.google.com/search?q=2004+mazda+6+2.3l+firing+order Pictures and text articles.

Read full answer

5/15/2021 7:28:32 PM • 2004 Mazda 6 • Answered on May 15, 2021

0helpful

1answer

2004 mazda 6 3.0 upper plenum torque

If you try to tighten the upper intake plenum bolts to 18ft/lbs you will most definitely break them off! They call for 89in/lbs so 7-8ft/lbs is plenty adequate.

Read full answer

10/10/2020 2:11:10 AM • 2004 Mazda 6 • Answered on Oct 10, 2020

0answers

Join: 1 day agoPosts: 3 1 day ago · #1 No headlights/turn signal/hazards I have a 2004 Mazda 6 with 3.0L. I have no headlights, turn signal or hazards. The only light in the front of the car that work it the side markers. All rear lights works except the turn signal and hazard. When I turn on the turn signal the inside indicator flashes fast. All fuses are good. Switched relays around still nothing. Any help would be greatly appreciated.

Read full answer

Be the first to answer 5/21/2019 4:23:24 PM • 2004 Mazda 6 • Posted on May 21, 2019 • Be the first to answer

0helpful

3answers

2004 Mazda 6 throwing code PO1410,PO171,PO174,PO421,PO431 Lunges while stopped in gear or idles up and down.

Start with the first code, most likely is causing the other codes. P1410 EGR Boost Solenoid Valve Stuck needs to be replaced. It's causing a vacuum leak.

Read full answer

2/7/2019 2:28:32 AM • 2004 Mazda 6 • Answered on Feb 07, 2019

0helpful

1answer

My car jerks while shifting gears or speeding in mazda 6, 2004

My Mazda 6 2006 model jerks and goes off then refuses to start. What could be the cause?

Read full answer

1/18/2019 7:14:22 PM • 2004 Mazda 6 • Answered on Jan 18, 2019

0helpful

2answers

When reversing the mazda demio reverse lights do

call the dealer they will know the location and if there is a reley to look at also

Read full answer

12/2/2018 9:15:04 AM • 2004 Mazda 6 • Answered on Dec 02, 2018

0answers

Is Fuel Pump Accessible without tank removal on 2004 Mazda 6 4dr

Read full answer

Be the first to answer 4/16/2018 2:53:40 PM • 2004 Mazda 6 • Posted on Apr 16, 2018 • Be the first to answer

0answers

Where is the fuel pump relay on 2004 mazda 6

Read full answer

Be the first to answer 3/29/2018 2:59:38 AM • 2004 Mazda 6 • Posted on Mar 29, 2018 • Be the first to answer

0helpful

1answer

2004 mazda 6 w/ v6. Car has miss and hesitation

Its usual for the Lambda sensors to cause this if faulty!!

Read full answer

3/4/2018 12:33:07 AM • 2004 Mazda 6 • Answered on Mar 04, 2018

0helpful

1answer

My Mazda 6 wont turn the starter....I took it out and it tested to be ga good starter....I replaced the battery..I have checked the relays...When i turn the key the security lite blinks and i hear a c

Anti-theft system does not recognize the key or has otherwise malfunctioned. Do you have a spare key to try?

Read full answer

1/27/2018 1:56:43 AM • 2004 Mazda 6 • Answered on Jan 27, 2018

0helpful

1answer

I have a 2004 mazda 6 with the battery light coming on and the transmission stays in 3rd gear, checked battery when the car is running and it has 16.8 volts , i was told the alternator was the problem

Your alternator can be the problem yes. It sounds like the alternator is overcharging. However, the alternator regulator is part of the computer. If you dont feel comfortable enough to diagnose yourself, then take to a reputable shop to have them confirm. DO NOT DISCONNECT THE BATTERY WITH THE VEHICLE RUNNING AS THIS CAN POSSIBLY BURN OUT YOUR COMPUTER As far as the 3rd gear issue it may be in a limp mode due to the over charging of the system. Good luck!

Read full answer

12/30/2017 5:17:41 AM • 2004 Mazda 6 • Answered on Dec 30, 2017

0answers