Questions & Answers for: removing plastice screen inlet

Problem with Whirlpool washing machine - AWO/D 4705 Light says - watertap closed Light below says - Clean filter The first thing to check is the water inlet valve. Unplug the machine, turn off the ...

Ad

Question about 62602 Electric Dryer

1 Answer

...removing the clamp Lift up on the plastic cover that covers the wires that power the pump. There may be a small plastic catch that is lifted up as to allow the connector to become free. Remove the ...

Ad

Question about Elite HE5t Washer

1 Answer

...removing the clamp 9. Lift up on the plastic cover that covers the wires that power the pump. There may be a small plastic catch that is lifted up as to allow the connector to become free. 8. Remove ...

Question about Elite HE5t Washer

1 Answer

...removing the clamp 9. Lift up on the plastic cover that covers the wires that power the pump. There may be a small plastic catch that is lifted up as to allow the connector to become free. 8. Remove ...

Question about 2006 Sonata

1 Answer

...inlet screen. You will need to access this pump/resevior from the right hand side wheel well (liner moved out of the way) and disconnect the wiring connector at the pump & the rubber hose at the ...

Question about 3.8 cu. ft. HE4t Front Load Washer

1 Answer

...removing the clamp 9. Lift up on the plastic cover that covers the wires that power the pump. There may be a small plastic catch that is lifted up as to allow the connector to become free. 8. Remove ...

Question about MVWC200XW Washer

1 Answer

...inlet screen maytag washer how do I remove the inlet screen to clean it??? it's plastic and looks "high tech" compared to the usual metal mesh screens with which I am familiar... ...

inlet valve most of which have a filter type screen inside. The valve would have to be removed and possibly cleaned. Some don't come apart and can only be replaced. The inlet valve is the plastic part

...screen to clean? There are two water inlet screens, one in each of the water inlets. The screens must be removed to cleand. Turn off both of the water supplies, Hot and Cold. Place a large square ...

Question about MVWC200XW Washer

0 Answer

...screen and you should start at the power inlet end and once loose remove by grabbing the power inlet end and lift up and away to avoid damaging any small cables. The battery is easy to remove just ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...