...DO I REMOVE THE AGITATOR THERE ARE NO SCREWS UNDER NEATH THE CAP OR ANY WHERE FOR THAT MATTER PLEASE HEPL is the machine a ge or whirlpool , the listing is confused give me the model nunber for ...
remove agitator For most Kenmore, Whirlpool, Estes, Maytag, and some GE washers the top portion of the agitator can be pried off (either a cap or fabric sofrtner dispenser depaneing on make and model)
Remove agitator bolt 3. Lift off agitator 4. Retrieve Necklace Regards; reg501 The FixYa team So I have a GE Washing Machine Model Type: GHWP1000MOWWand my washer ate my necklace and is underneath the
Question about WBSR3140DW Top Load Washer
...remove the agitator ? You should be able to unscrew the top cap of the agitator ( may be left hand thread ) and lift off the agitator once the cap is off... They sometimes stick so you may have to ...
Question about WBSR3140DW Top Load Washer
...agitator is not brocken. Remove the soap cap from the top of the agitator and with a torch, look down into the shaft. There is normally a nut which secures the agitator to the gearbox shaft. If the ...
Question about WBSR3140DW Top Load Washer
...remove agitator from GE washer? Model WHDRR418G1WW. GE washer will not agitate. Drains OK. How do I remove the agitator to see if it is still connected to clutch/motor? Thanks...Dave how to remove ...
remove agitator on a whirlpool washer, remove top cap from agitator, Next you will find a translucent cap, remove this with your pliers. Then you will see a 3/8 inch nut, Back this nut out and you can
Question about WBSR3140DW Top Load Washer
...REMOVE AN AGITATOR FROM A WASHING MACHINE I NEED TO REMOVE THE AGITATOR FROM A GE TOP LOAD WASHER, MODEL NUMBER WHRE5260E1 1 First you must determine the brand of washing machine you have.2 To ...
Question about Spacemaker WSLP1100D Top Load Washer
...remove the agitator on my GE Spacemaker model GSLS1100? All the videos and descriptions I can find advise to yank the agitator and it should come out. My agitator looks different and you can't get a ...
remove agitator have rusted hole in tub , trying to remove agitator. Tried channel locks , pipe wrench and other tricks to no avail. Maybe I`m doing something wrong model WWA5710 That is a very old GE
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions