Questions & Answers for: how to put needle in

...put the needle in the left position and bring the needle all the way down by turning the handwheel. As the needle comes up make the point of the hook enter the scarf of the needle (just above the ...

put a new needle in?? How?? The needle popped out while I was sewing, it hasn't broken, but I can't figure out how to put it back... There is a small screwdriver that comes with the sewing machine ...

...Thank-You Did you try putting in a new needle? And is the needle put in correctly? Otherwise , I am not sure about this one...I had that happen to me once, and putting a new needle in corrected

...a needle is to buy a needle threader, it is a device that you put through the eye of the needle and put the thread through its hole then just pull the threader back out and the needle is

...put in a new needle [email protected] thanks! There should be a screw down by the needle, by the presser foot. Unscrew that button and remove the old needle. To replace that with a new one... ...

...put the needle back in. I think it just needs to be put back & tightened but I'm not sure how.. when you put the needle in the needle clamp holder the flat side of the needle goes toward the back ...

...put a needle in. how do i fix it? do you know of a book i can buy so that i can fix this machine when a problem comes up. I'm assuming that your talking about the needle bar (where you put the ...

needle holder cannot be turn to the highest point I unfortunately broke 2 needles. i successfully took the needles out and when i was about to put the 2 new needles- i cannot put it as the holder ...

the needle again and clear cover off then put the ignition key on acc position while everythin connected exept your needle,after u put in the key install the needle,putting the key is zeroin the guage

...needles go "flat to back" while others are put in differently. Not all "Universal" needles are used in ALL machines. Please check your manual to see how to put your needle selection into the