Power Acoustik I am trying to install a power acoustik gothic amp and the red light on the amp is on. When I touch the ground wire to the amp the red light goes off but nothing happens. I am not sure ...
...power acoustik amp and the protection light is on. and i already have an amp in my car and i used the power and ground from that. and the amp that im trying to hook up the red protection light is on. ...
...power acoustik sterling amp okay I have a 2 channel 600 watt amplifier and i got it hooked up and i plugged my subs in and they are not pushing bass but instead the vocals like their is absoulutly no ...
how many fuses does the power acoustik ov2-1800 have and what amp are they. there are 2 fuses they are 30 each
Question about GOTHIC OV4-800 Car Audio Amplifier
power acoustik amp to 2ch where do i connect the rca inputs or how I had the Power acoustik saphire 4ch and had to do the same thing. Use the Positive from Term1 (spkr1) and Negative from Term2(spkr2)
Question about GOTHIC OV2-300 Car Audio Amplifier
i have a power acoustik 0v2-300 2 channel amp i just wanna know can i bridge it Most amps will show right on the amp by the speaker wire terminals if it is bridgeable. Good luck !
Question about LT-980/2 Car Audio Amplifier
how many watt thus a Power Acoustik LT-980/2 do? normally check the fuse (s) example if the fuse is 40 amps the amp can do 430 rms...
Question about Power-Acoustik FUBAR-12W 12" 1800W Subwoofer Car Speaker
i have power akoustik 12" i have power akoustik 12" fubar sub 1600w, wondering what size power akoustik mono amp is best, if it is? If you sub is dual 4 ohm voice coil, you can get a 4000 watt ...
Question about Power-Acoustik FUBAR-12W 12" 1800W Subwoofer Car Speaker
Power Acoustik a 1800 DB Class D Series amp I hooked it up from an existing amp pretty much upgrading it has power with no protection light but no sound comes out what's wrong? do you have it wired in
Question about Power-Acoustik FUBAR-12W 12" 1800W Subwoofer Car Speaker
Power Acoustik MSA4-1300D Amp to a single subwoofer? It depends on how many channels are on the Amp. If it's a 2 channel you can bridge it using the positive on one channel and use the negative on the
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions