Questions & Answers for: Lexmark paper roller

Question about E238 Laser Printer

1 Answer

...paper pickup roller and pad separation. Open the paper tray and check for paper dust on pickup rollers Clean the rollers and separation that is fixed in the tray itself using damp cloth. hope this ...

Ad

Question about E210 Laser Printer

1 Answer

...paper to the main roller, which then passes it to other rollers, coronas, transfers, and such. That is the How, in short, Now the Why. That little blue roller wears down over use, like an eraser. It ...

Ad

Question about E232 Laser Printer

2 Answers

...paper indicator at left bottom. Two rollers come down on axel near center. I pulled off the rubber tire like roller, then twisted the roller inside out and reinstalled it with the fresh side out. If ...

Question about E250dn Laser Printer

1 Answer

lexmark e250dn Will perform great, only issue, when the paper tray is just about empty - less then 1/2 full- the paper will not feed properly, will show paper jam, sheet remains crumpled in the paper ...

roller drags several sheets of paper and results in a paper jam Each time I print the roller drags several sheets of paper and it results in a paper jam. The problem could be with the roller itself ...

Paper jams no matter what stock I use; Lexmark e232 The paper is continually jamming no matter what stock I use. I once came across a ''self cleaning'' (or similar) process but can no longer find it. ...

...and toner cartridge the roller trick helps the printer pick up paper the toner/print drum trick helps reseat the inner workings of the printer correcting any misalignments that impede paper ...

I have a lexmark e2e2 printer that starts to feed the paper then stops, I have checked the feedrollers, they pick up the paper and start to advance it, I have replace the fron paper sensor and still ...

Question about E232 Laser Printer

1 Answer

paper feed won't pick up paper. tried to put single paper in but paper jam light goes on but no paper located. we think we need new rollers for the paper feed but not sure where to get them in ...

Why has it stopped loading 20# paper from tray unless large quantities of paper are loaded. Check for a worn or defective feeder mechanism. If it works with larger loads of paper this is a sign that ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...