20 Most Recent
Questions & Answers
The E232 cartridge uses a chip to set the page count on the printer. To reset this you need to replace the chip on the cartridge. Your friendly cartridge remanufacturer has access to the chip. They can source one for you.
on Oct 03, 2014
What does the symbols on the printer mean
If your intrested of that find a service manual or a user manual and you will find out , but if i suspect we'll your printer has a problem whith the main board a service man might try to change the bin info located on the chip from pannel
on May 18, 2014
Orange light still flashes after new cartridge
Can you tell us which lighton the modem has a flashing orange light? The operator panel lights meandifferent things, depending on their sequence. Please tell us more about it sothat we can assist with your issue.
For further assistance, please contact Lexmark Technical Support
on Oct 03, 2013
Lexmark E232 - Tray-1 Paper Problem
Have the same problem after 1,500 pages! This was Lexmark's solution (and it worked)...
Take the paperfeed tray out and you will see a red lever , press it
downwards and you will see the paperfeed rollers coming down , you need to
pull the rubber tyres off those rollers and place them inside out over
them and then try printing any document. Check the paper weight and
the paper type you need to use 20 pounds regular paper and try runnning a
can of compressed air inside the machine.
If rubber tyres on the paper feed rollers are totally worned out you
need to replace the feed rollers.
on Jul 17, 2013
Not finding what you are looking for?