Question about WMK300 Professional Belgian Waffle Maker
...sleeve. The replacement part should be a 240°C/464°F 10 - 15 Amp thermal fuse. NTE sells a part NTE8242 which works available from Mouser.com for $1.41 plus shipping. I have the same problem. I ...
Question about WWM200PC Waffle Maker
...sleeve. The replacement part should be a 240°C/464°F 10 - 15 Amp thermal fuse. NTE sells a part NTE8242 which works available from Mouser.com for $1.41 plus shipping. Was going to just get
...store. On mine, it was a 240 degree C cut-off. The part I used was from NTE. Part number is NTE8242. It cost me $1.40. I suspect the reason this blew on my iron is because Oreck engineers
Question about WMK300 Professional Belgian Waffle Maker
...Found postings on this with same problem. Thermistor can be ordered from Newark.com. Part No. NTE8242. $1.60 ea + shipping. there is no manual because there are no parts made .......sorry . ...
...field magnets near the brush assemblies on both sides. I replaced them (both were blown) with 2 of NTE8242 ($1.60 each, 240oC 15A). These are way too hot, but that is what I had on hand. I thought ...
...field magnets near the brush assemblies on both sides. I replaced them (both were blown) with 2 of NTE8242 ($1.60 each, 240oC 15A). These are way too hot, but that is what I had on hand. I thought ...
...a George Foreman grill that is like new. Where can I get such a critter? Use a direct sustitute NTE8242 to replace it, check your local appliance repair or ...
Usually answered in minutes!
378 Questions
257 Questions
252 Questions
238 Questions
190 Questions