Question about FS605 (FS605SE) Networking Switch
Netgear FS605,i was told i could just take this home and hook-up both my PCs and the cable modem to this and it would be that simple.However only 1 of my PCs will get internet connection.Both run fine
Wont Switch on Bought the FS605 recently and its been working fine. Just tried to turn it on this morning and will not power up. I know its not a problem with the electrics. Any idea? Test power in ...
...port 4 or use a utp crossover cable. As you can see on the Netgear FS605 the modem/router has to be connected to port 4. The correct way to connect these devices is: Modem > Router > Switch > ...
Question about FS605 - 5-Port 10/100 Network Switch (Recertified) (FS605NAR)
...netgear FS605 5 port switch and want to try to separate a wireless router from the desktop computer. I connected the cable modem to the netgear switch then one line to the wireless router and another ...
...netgear fs605 5 port switch to hard wire in a ps3 and my dell lap top. can only run one or the other. not both at the same time. what is wrong? The FS605 is a switch, not a router. You can only run ...
Question about FS605 - 5-Port 10/100 Network Switch (Recertified) (FS605NAR)
Hi I have lost my Net Gear fs605 v2 instructions Hi I have lost my Net Gear fs605 v2 instructions Can I print out a copy from your department I appreciate any help you can give Thanks Gerry The manual
Question about FS605 - 5-Port 10/100 Network Switch (Recertified) (FS605NAR)
is netgear fs605 v3 compatable with windows 7 Yes It is compatable with windows 7
...Netgear FS605 stopped working. All lights flashing about 1x/sec. No change in cabling or configuration in past year. Upstream Linksys N wireless router working fine. Tried disconnectring ethernet ...
...netgear fs605 To RESET the Netgear, power up the Netgear then press and hold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port ...
need IP addresses if you are attempting to network and need ip addresses. that piece of hardware doesn't supply dynamic addresses. you would need to manually program your connected computers and other
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions