...Maytag Neptune Model FAV6800AWW recently started to wobble so badly when loaded it stops spinning. However, when I run the spin cycle unloaded, it completes the cycle fine. If there's a loud thumping ...
...maytag neptune sounds like an airplane overhead when spinning Most noises from a washing machine occur during the spin cycle. If you hear loud thumping during the spin, the load of clothes may have ...
Question about Neptune MAH5500B Front Load Washer
maytag neptune MAH5500B spins 2 minutes and shuts maytag neptune washer MAH5500B spins 2 minutes on a 9 minute cycle and shuts off with 7 minutes remaining Faulty Timer. It's probably because you have
...neptune, it stops on the spin cycle and say load is unbalanced, but i have rearranged the load several times, and still the load will not spin.... your un-balance switch may be getting bad/loose,need ...
Question about Neptune MAH5500B Front Load Washer
Maytag Neptune front load washer model MAH3000AW, load during spin cycle YOU MEAN LOUD DURING SPIN CYCLE? IF THAT SO, WHAT KIND OF NOISE? BANGING NOISE MEANS YOU HAVE UNBALANCED LOAD OR ONE OF THE ...
Question about Neptune MAH6700A Front Load Washer
...code Sd or 5d during the spin cycle. Sometimes it showed uL in the rinse/spin cycle. What do they mean? sd is suds error. add only HE soap. UL is unbalanced load. watch load size and balancing
...spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if
thank you I believe The dc code is due to an "unbalanced" load situation. Is this happening when it tries to spin? I know some washers have switches that sense this. Is this in the wash or spin cycle
Question about Neptune MAH5500B Front Load Washer
Maytag neptune washer makes noise during spin cycle now won't run during spin cycle and say unbalanced load. Shift clothes cycles power still won't work. Try adjusting the feet at the bottom ...
Question about Neptune MAH5500B Front Load Washer
What would cause my Maytag Neptune front washer to vibrate during the spin cycle, after it had a unbalanced load? Lynn Worn out drum Bearing can cause vibration and make the spin cycle very noisy.
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions