Question about MS9357E Motherboard
power led)? Matsonic MS9357E thanx Hi, A similar post with, http://www.fixya.com/support/t186324-front_panel_wiring The motherboard manual would also provide quick references. Kind regards. I have the
...Matsonic MS8127C+ - motherboard - ATX - KT133APlease,tell me about RIGHT jumpers position for this board. May be via foto Thank you. :) This is a jpg of a modern board. Your board may have more pins. ...
...people, free drivers needed bonjour , aider moi SVP, connexion des jumper suivants: power sw, reset sw, HDD LED, Have a look here: ...
matsonic pin setings how do i find out whitch pin is power switch h.d.d led reset sw on motherboard ms9158 ep please help please help me seach manual for motherboard matsonic ms9158ep trial and error ...
Question about MS8137C Motherboard
...LED off. Red light permanently lighted. When turning power on, all the fans run but nothing happens. I've cheched 5V and 12V on disk PS connectors. The green LED is always off and the red one is ...
...power led. The pin block number on the main board and the pin numbers for these led's and power led, or a diagram for the location of the pin block on the board. Look on your motherboard. the pins ...
It does not power on! Led by memory slot lit, but nothing on display - power up routine not complete. Bios problem? CPU problem? i need more information on your problem you are being specific
...matsonic motherboard ms9138d+ v1.4, but dont have manual, and cant connect power button, reset button,and led diods. Can u help? ...
...lead to the LEDs should be labelled, e.g., 'PWR/power', 'RST/reset', 'SPK/speaker', 'HDLED/hard-drive-LED', 'PWRLED/power-LED'. Connect each labelled connector to the labelled pins on the
where to connect power and led Dear User, To connect the power which is coming from power supply you will find the white color 20 pin socket on the mother board. Regards, Tech_Comp
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions