Questions & Answers for: Ford Explorer loose spring

Question about 2002 Explorer

2 Answers

...spring? The cruise works intermittently, the horn works all of the time. The wiring for the drivers seat o.k.(removed and inspected pins and seats) 4x4 low does not engage and light flashes. Try ...

Ad

Question about 1999 Explorer

1 Answer

loose My 2000 ford explorer power seat will not lock in an upright position. If I lean back the seat will not support my back. I want to take the seat apart but dont know if the seat is spring loaded.

Ad

...loose spring to my door lock 99' Ford Explorer. I locked my keys and didn't have a spare..tried using a slim jim and apparently pulled a spring, loose. Hence my lock keeps getting stuck (Driver side ...

Question about 1995 Explorer

1 Answer

...loose From what i can see, the gas pedal cable is still taut, but there is a spring at the end of it, and it appears that the pedal is just loosely hanging inside the vehicle. I don't know what to ...

Question about 1994 Explorer Limited

2 Answers

spring so you can pull the bolts out easily and then reposition springs to lign up then new shackles and re bolt everything. YEp jack it up till they shakels are sligtly loose then remove the bolt one

Question about 1997 Explorer AWD

1 Answer

...spring is holding it in. You will need a special set of tools to get that line loose, the tool goes over the line and pushes up inside to release the fitting. NAPA sell the plastic ones kinda cheap, ...

Question about 1997 Explorer AWD

1 Answer

it's loose. The other issue may be the wiper arm spring. Parts store usually have springs which can be added onto the arm for a little more force on the windshield, to help out some older worn springs

Question about 1997 Explorer AWD

1 Answer

...malfunction. The switch is located under the trunk on your brake pedal. You may have weak spring on it, or it is corroded and need replacement. Check also the loose connection on wires. Regards, ...

Question about 1999 Explorer

1 Answer

...it falls back this normaly works on a ratchet type of system you need to check if the locking mechanism is engaging when you release the handle could be that the tension spring has come loose or ...

loose on the mounting bracket? If so, I'm guessing that somewhere along the way the anti-rattle springs that are intended to keep spring tension on the pads have been misplaced. You can probably buy a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Manuals & User Guides

Loading...