Questions & Answers for: knob regulator

...knob to control heat. No matter what setting the knobs are on the flame continues on high. Is the problem with the knobs or some other part? What can I do to fix it. This is a problem with the ...

...regulator knob either way. This is a brand new compressor fresh out of the box. Is there some sort of trick when using the knob outside of mussel? Most air pressure regulator knobs work like a ...

Regulator knob won't turn I've purchased a replacement regulator AC-0007 and can't get the knob to turn. I've pulled up to disengage the lock position but the knob still won't turn. When looking at ...

...regulator knob is very hard to turn against the pressure inside it. To set an accurate pressure, squeeze gun trigger (while connected to air hose) to get air flowing... then twist regulator knob out ...

...knob on the LP regulator for? It has adjustment numbers from 0 to 6 molded into the knob. That knob should be to bring pressure up and down with 0 being off or the lowest range of the regulator. This ...

regulator knob is stripped you will need to replace the manafold or as a temp fix remove the safety valve (let out air from tank first) and install a tee fitting. On one port of the tee reinstall

...regulator (opposite the knob) find a hex nut. Remove nut (let out all the air from tank before removing nut) and pull plunger/spring away, clean , lube and reinstall for test. If still no ...

...regulator knob was stripped. It's cheapo metal. I removed that and the knob (which is held onto the bolt with a smaller reverse-threaded screw, and replaced the cap using a larger diameter bolt I ...

...regulator you remove the knob in the center of the regulator by pushing it in and turning it. Then remove knob and flip it over and re install it there should be Nat and L.P. markings on the knob. ...

Need a replacement regulator knob for my pressure cooker # 99700 need keystone regulator knob Fixya does not sell replacement regulator knobs.