Questions & Answers for: kicker amp protection mode

...kicker amp running two 12's. the system plays but if i turn it up too loud the amp goes into protection mode. can u please help? need more info, make and model of amp and subs please Hi does the amp ...

kicker amp I have a kicker 1200.1 class d subwoofer amp and it is stuck in protection mode. What and how can i solve this if you amp is in the PROTECTION MODE its means that there some defective part

...kicker for inspection and they said there was no problem with it. i checked all wiring except for behind the deck. could it possibly be a bare wire touching metal somewhere in the dash? if the amp is ...

...suggestions? Generally, if a Kicker amp has the power light lit and the protection light isn't lit, it's working. Are you sure that you have signal feeding the amp? Are you sure your speakers are

...kicker amp mounted in my rear deck for 3 years. I took the vetteout tonite and I noticed that when I turn up the volume above 50 or 60 % the amp goes into protected mode and the led turns red. After ...

...amp or to take it to a shop this month. My kicker amp zx1500.1 keep going in protection mode I unhooked the sub speak wires and put the ACR cords back in and it didn't go in protection mode what ...

...kicker zx 1000.1 amp goes into protect mode as soon as you put power and ground to it nothing else hooked up It is normal for them to go into the protect mode, If the speakers are not hooked up to

kicker kx850.4 protection light stays on know power light Check power make sure you have solid 12 volts. Disconnect speakers, shorted speaker can cause protection mode to engage. If still in protect ...

...kicker amp zx1500.1 keep going in protection mode I unhooked the sub speak wires and put the ACR cords back in and it didn't go in protection mode what next Check ohm reading of the speaker. Should ...

...amp I have a kicker Solo-Baric L7 10-in subwoofer and a 2500 watt power acoustik one channel class d amp every time I hook the speaker to the amp it goes in protection mode what is the correct way to ...