Question about 15218 Mechanical Sewing Machine
sewing expert. Apparently I am facing two problems : 1. Needle keeps hitting at one place only, cloth does not move. 2. When I put the thread into needle and try to get thread from bobbin, it does not
machine for a few years, be aware that old oil will dry out and combining with dust and form a "clag" like glue (another reason for some sort of cover, even a teatowel !) FINALLY, A WORD ON THREAD: If
Question about 11206 / 11306 / 11506 / 11606
...sewing a straight stitch. It does not appear to happen with any other stitch, I have been able to complete my project by using a zigzag stitch. I oiled my machine, this improved the overall ...
kenmore elite model 19365 This generic tension setting guide will walk you through attaining the correct balance of tension for any machine. ...........................................................
...sewing, the discs are again tensioned by way of a spring to give the variability required. You may find you have thread or lint build up between the discs. If the looping threads are on the underside ...
sewing thread in bobbin case loosens up causing tangled stitches,which have to be removed. Sometimes there is no problem,other times it may happen 3 or 4 times on the same project. Tightening screw on
Kenmore model 385.1764180 bobbin jam Bobbin thread winds tight around bobbin case. I've been sewing a thin stretchy knit using the straight stretch stitch with a blue ball point needle. I had been ...
...Kenmore is off...dial needs to be on "9" in order for the stitches to look right Please TRY the solution BEFORE giving your considered rating. Specific detail on bobbin case adjustment (with picture) ...
Question about Drop-In Bobbin 505S-21BH Mechanical Sewing Machine
...Kenmore Ultra Stitch 12 model 1595280. Tension used to work on setting 4 the best, now it is on 0 because 4 does not pull through at all way to tight. Bobbin thread messes up when I sew a straight ...
Question about Drop-In Bobbin 505S-21BH Mechanical Sewing Machine
...Kenmore 385 need to adjust tension on a Kenmore385 Please TRY the solution BEFORE giving your considered rating. Specific detail on bobbin case adjustment (with picture) near halfway down reply, the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions