...fuse!! You need several kinds of screwdrivers and loosen the bottom. Then the side piece has one screw that holds it on and we had trouble getting that off but eventually I just held it differently ...
janome 9000 My Janome 9000 just shut off. I was sewing and all was well, then all of a sudden it just turned itself off and will not turn on... not even the light. My husband thinks it is probably a ...
Janome 9000 First, while sewing, thread tangled up on backside of fabric and machine stopped. I untangled the mess and started to sew again and same thing happened.. then the machine "died". After ...
Question about Memory Craft 9000 Computerized Sewing Machine
...Janome MC 9000.. IMy husband is going to replace it if i can find one... This can be ordered from a Janome dealer only and he will have to order it from The Janome Company. They are not cheap so get ...
Question about Memory Craft 9000 Computerized Sewing Machine
9000 has a safety fuse which blows to protect the circuit board from overloading. It is a simple 3amp fuse available at Radio Shack or automotive store. If you are mechanically inclined, give it a try
Question about Memory Craft 9000 Computerized Sewing Machine
janome 9000 refusing to start My Janome 9000 will not turn on any suggestions.there is power to the machine I'll bet it's the fuse. I had the same problem about a year ago. Lay the machine on it's
Question about Memory Craft 9000 Computerized Sewing Machine
Janome MC 9000 that will not power on. I changed the light bulb while it was powered on and as soon as I plugged in the bulb the machine shut down. It has been dead since. I had no problems with it up
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions