Questions & Answers for: Hitachi ics

convergence circut I have a 46" hitachi rear projection screen tv. I know that it is the conergence that is out but I need schematics or part number to figure which one it is before I start taking it ...

Part number for IC module Hitachi 50EX12BA? HI, I'm an Army soldier stationed in PR; having convergence problems. Does anyone know what the IC module part number is and where I can get it? My problem ...

colors all messed up fine last night, woke up turned on colors seem to be out of sync..will not "magic focus" The fact that you used the term "magic focus" tells me you have a Hitachi projection set. ...

Convergence IC's? I suspect my Hit. 43UWX10b (5 yrs old) requires new Convergence IC's as the several colors are bleeding down and to the left. How many convergence IC's does this model require if I ...

...green and blue ghosting is a convergence problem that is either bad connections at the convergence ICs or defective ICs. If you can solder, try resoldering the ICs. If that fails to resolve the ...

...circuit is having a problem. This can be either bad connections at the pins of the convergence ICs or defective ICs. These are large black ICs attached to a heat sink and should be marked

...I'd rather not replace the IC's if I don't have to. YOU HAVE TO REPLACE IC BECAUSE IT IS BAD THE ICS NUMBER HAS CHANGE FOR STK392-110 TO STK392-150 THEY WILL SYAN MORE ...

WANT 2 KNOW 43FDX20B HITACHI TV IC NUMBER NAD PART NO where can I buy IC's Hello, You can find OEM IC's for this model (43FDX20B) from a major Hitachi parts distributor on the link below: Hitachi ...

The image on the TV has sort of condensed and disappeared. Now there is a bright line across the middle of the screen and a sliver of (about an inch) of image above that line. The rest of the screen ...

...gets to the red phase and it shows the number 5 and stops. Any ideals? You need to replace the STK ICs which are Convergence ICs STK392-110 use 120s or 150s also check the small ohm resistors around ...