Questions & Answers for: hot blade

...hot air gun - (a hair dryer would probably work) - to heat the socket of the blade where the pin (on the drive-shaft) inserts into the socket of the blade and (when the blade is turned) locks the ...

...hot blade can badly burn a pet, so make sure you keep them cool) Most common cause is a faulty armature but these are expensive to just try and need testing, send them away for a servicing to see if ...

gto trimmer keeps geting hot when i use it my gto trimmer keeps getting hot when i use it It's not abnormal for a trimmer to get hot while being used. If it's getting VERY hot it may be time to get a ...

...blade. Thanks. Put a kettle of hot water on the stove. After it starts boiling pour about 3 inches of hot water in the bread pan. Wait about 5 minutes. Dump water out and remove blade. If this fail. ...

then tried to spin the fan blades. Ihad inadvertantly bent a blade so it would not spin. I bent the blade back into shape and turned it on. The fan worked and very quickly the middle was no longer hot

...blocks. An 1/8" blade is tricky to use. Make some cool blocks from very hard wood the will contact a narrow blade without destroying the teeth the blade will become hot so use blade lubricant

...know which blade is what, the small blade is the hot side, and the large blade is the neutral side. Easy way to remember is the word "hot" is shorter than the word "neutral" so short word = hot

...The blades are pressed onto the shaft. heavy use and the blades spin on the shaft..probably gets hot...Solution take it to a machine shop and tack weld the blades to the knob above the ...

...Or Cooling in the fridge and then once cool put the screw blade part in hot water to create a temperature difference. Maybe ice and water inside the ninja and hot water to the outside blade

Why are my new Oster Golden A5 clippers running hot ? My new Oster Golden A5 clippers are running hot but I have only used them a few times. I see no hair inside and they still look like new inside. ...