Questions & Answers for: hook hose kirby vacuum

...hook up the attachment hose to use the attachments by locking the attachment hose to the top lever. All regular Kirby attachment will fix on the attachment hose end including the spin brush if you ...

...Kirby and push the hose arm toward the Kirby until it pops on. (if the hose isn't all the way on, the vacuum will not run) If you need to, lube up the edges of the hole with a wee bit of vaseline or ...

...notch on the Kirby and push the hose arm toward the Kirby until it pops on. If you need to, lube up the edges of the hole with a wee bit of vaseline or hand lotion. This makes the hose engage

...Kirby and push the hose arm toward the Kirby until it pops on. If you need to, lube up the edges of the hole with a wee bit of vaseline or hand lotion. This makes the hose engage easier. Instruction ...

...not hook the hose up so it blows instead of sucks,do the same thing with a rag around the end of the hose and seal the hose in the drain,then turn it on.if you have a shop vac that will work ...

...hook up hose put Kirby down to lowest level, notched end of hose hooks in on tray other end on the tank,on/off switch refers to the foam, Turn machine on to lay the foam & scrub carpet, take ...

...hose onto the upright G5 model? First, twist the belt lifter dial on the front of your kirby roller brush head counter clockwise to take the belt off the motor fan pulley, then undo the latch at the ...

...hook up the attachment hose ? I think you need to copy and paste this link, and grab a drink and watch closely. Have fun! http://www.youtube.com/watch?v=Jz6DFxSwvBs ...

...the vacuum head lock from left to right so it catches the hose. Read more: Kirby Ultimate G Instructions ' eHow.com ...

...hook up the hose to the front , but what do i put on the side where the bag goes..??? click this link for help ...